Performance Impacts of Metal Additive Manufacturing of Very Small NozzlesSource: Journal of Aerospace Engineering:;2021:;Volume ( 034 ):;issue: 002::page 04020115Author:Christopher D. Tommila
,
Carl R. Hartsfield
,
Joel J. Redmond
,
Jeffrey R. Komives
,
Travis E. Shelton
DOI: 10.1061/(ASCE)AS.1943-5525.0001229Publisher: ASCE
Abstract: For small satellite electrothermal or chemical thrusters, nozzle throat diameters may be less than 1 mm. At these sizes, the effects of flow surface roughness on nozzle performance must be considered. In this research, nozzles were processed using a nickel alloy by laser powder bed fusion (LPBF), a form of additive manufacturing. Experimentally, the thrust coefficient was measured over a range of targeted throat Reynolds numbers and nozzle expansion ratios. Additional nozzles were manufactured using traditional machining practices to compare performance at similar flow conditions. An analytic model was then developed to determine that performance may not be predicted by traditional viscous loss theory. Surface features of the LPBF manufactured nozzles appear to have caused bow shock systems that overwhelm all other impacts, limiting performance of the as-printed nozzles. This imperfection was then implemented into a computational fluid dynamics (CFD) flow study, showing shock wave reflections and similar thrust losses.
|
Collections
Show full item record
| contributor author | Christopher D. Tommila | |
| contributor author | Carl R. Hartsfield | |
| contributor author | Joel J. Redmond | |
| contributor author | Jeffrey R. Komives | |
| contributor author | Travis E. Shelton | |
| date accessioned | 2022-01-30T22:38:50Z | |
| date available | 2022-01-30T22:38:50Z | |
| date issued | 3/1/2021 | |
| identifier other | (ASCE)AS.1943-5525.0001229.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4269338 | |
| description abstract | For small satellite electrothermal or chemical thrusters, nozzle throat diameters may be less than 1 mm. At these sizes, the effects of flow surface roughness on nozzle performance must be considered. In this research, nozzles were processed using a nickel alloy by laser powder bed fusion (LPBF), a form of additive manufacturing. Experimentally, the thrust coefficient was measured over a range of targeted throat Reynolds numbers and nozzle expansion ratios. Additional nozzles were manufactured using traditional machining practices to compare performance at similar flow conditions. An analytic model was then developed to determine that performance may not be predicted by traditional viscous loss theory. Surface features of the LPBF manufactured nozzles appear to have caused bow shock systems that overwhelm all other impacts, limiting performance of the as-printed nozzles. This imperfection was then implemented into a computational fluid dynamics (CFD) flow study, showing shock wave reflections and similar thrust losses. | |
| publisher | ASCE | |
| title | Performance Impacts of Metal Additive Manufacturing of Very Small Nozzles | |
| type | Journal Paper | |
| journal volume | 34 | |
| journal issue | 2 | |
| journal title | Journal of Aerospace Engineering | |
| identifier doi | 10.1061/(ASCE)AS.1943-5525.0001229 | |
| journal fristpage | 04020115 | |
| journal lastpage | 04020115-1 | |
| page | 1 | |
| tree | Journal of Aerospace Engineering:;2021:;Volume ( 034 ):;issue: 002 | |
| contenttype | Fulltext |