Show simple item record

contributor authorChristopher D. Tommila
contributor authorCarl R. Hartsfield
contributor authorJoel J. Redmond
contributor authorJeffrey R. Komives
contributor authorTravis E. Shelton
date accessioned2022-01-30T22:38:50Z
date available2022-01-30T22:38:50Z
date issued3/1/2021
identifier other(ASCE)AS.1943-5525.0001229.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4269338
description abstractFor small satellite electrothermal or chemical thrusters, nozzle throat diameters may be less than 1 mm. At these sizes, the effects of flow surface roughness on nozzle performance must be considered. In this research, nozzles were processed using a nickel alloy by laser powder bed fusion (LPBF), a form of additive manufacturing. Experimentally, the thrust coefficient was measured over a range of targeted throat Reynolds numbers and nozzle expansion ratios. Additional nozzles were manufactured using traditional machining practices to compare performance at similar flow conditions. An analytic model was then developed to determine that performance may not be predicted by traditional viscous loss theory. Surface features of the LPBF manufactured nozzles appear to have caused bow shock systems that overwhelm all other impacts, limiting performance of the as-printed nozzles. This imperfection was then implemented into a computational fluid dynamics (CFD) flow study, showing shock wave reflections and similar thrust losses.
publisherASCE
titlePerformance Impacts of Metal Additive Manufacturing of Very Small Nozzles
typeJournal Paper
journal volume34
journal issue2
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0001229
journal fristpage04020115
journal lastpage04020115-1
page1
treeJournal of Aerospace Engineering:;2021:;Volume ( 034 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record