YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Electronic Packaging
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Electronic Packaging
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Embarked Quad Flat Nonlead 16, 32, and 64 Electronic Devices Subjected to Free Convection: Influence of the Adhesive Paste on the Junction Temperature

    Source: Journal of Electronic Packaging:;2017:;volume( 139 ):;issue: 004::page 41009
    Author:
    Baïri
    ,
    Abderrahmane;Chanetz
    ,
    Bruno;Millán-García
    ,
    J. A.
    DOI: 10.1115/1.4038113
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: The junction temperature of the quad flat nonlead (QFN) electronic devices equipping embarked assemblies may be controlled so that it does not exceed the maximum value recommended by the manufacturer. The packaging design is then important to ensure correct operation and high reliability, given the significant power generated during operation and the inclination angle of the packages during the flight. It is particularly important when thermoregulation is achieved by means of natural convection. The objective of this study is to examine the influence of the adhesive paste used to connect the Die of the QFN with its base. The study deals with three devices among the most used in the conventional arrangements: the QFN16, 32, and 64. A three-dimensional (3D) numerical solution based on the control volume formulation allows to determine their thermal behavior for generated power ranging from 0.1 to 1.0 W by steps of 0.1 W and inclination angle varying between 0 deg (horizontal position) and 90 deg (vertical position) by steps of 15 deg. A wide range of the paste’s thermal conductivity has been considered, varying between −80% and +100% of its average value, measured by means of the transient plane source (TPS) method. The numerical results confirmed by measurements show that the junction temperature strongly increases when the conductivity of the paste decreases. The temperature is moderately reduced when the paste is thermally more conductive. Relationships are proposed to calculate the junction temperature for the three considered devices, according to the generated power, the inclination angle, and the relative paste’s thermal conductivity.
    • Download: (2.738Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Embarked Quad Flat Nonlead 16, 32, and 64 Electronic Devices Subjected to Free Convection: Influence of the Adhesive Paste on the Junction Temperature

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/4242993
    Collections
    • Journal of Electronic Packaging

    Show full item record

    contributor authorBaïri
    contributor authorAbderrahmane;Chanetz
    contributor authorBruno;Millán-García
    contributor authorJ. A.
    date accessioned2017-12-30T11:44:08Z
    date available2017-12-30T11:44:08Z
    date copyright10/25/2017 12:00:00 AM
    date issued2017
    identifier issn1043-7398
    identifier otherep_139_04_041009.pdf
    identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4242993
    description abstractThe junction temperature of the quad flat nonlead (QFN) electronic devices equipping embarked assemblies may be controlled so that it does not exceed the maximum value recommended by the manufacturer. The packaging design is then important to ensure correct operation and high reliability, given the significant power generated during operation and the inclination angle of the packages during the flight. It is particularly important when thermoregulation is achieved by means of natural convection. The objective of this study is to examine the influence of the adhesive paste used to connect the Die of the QFN with its base. The study deals with three devices among the most used in the conventional arrangements: the QFN16, 32, and 64. A three-dimensional (3D) numerical solution based on the control volume formulation allows to determine their thermal behavior for generated power ranging from 0.1 to 1.0 W by steps of 0.1 W and inclination angle varying between 0 deg (horizontal position) and 90 deg (vertical position) by steps of 15 deg. A wide range of the paste’s thermal conductivity has been considered, varying between −80% and +100% of its average value, measured by means of the transient plane source (TPS) method. The numerical results confirmed by measurements show that the junction temperature strongly increases when the conductivity of the paste decreases. The temperature is moderately reduced when the paste is thermally more conductive. Relationships are proposed to calculate the junction temperature for the three considered devices, according to the generated power, the inclination angle, and the relative paste’s thermal conductivity.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleEmbarked Quad Flat Nonlead 16, 32, and 64 Electronic Devices Subjected to Free Convection: Influence of the Adhesive Paste on the Junction Temperature
    typeJournal Paper
    journal volume139
    journal issue4
    journal titleJournal of Electronic Packaging
    identifier doi10.1115/1.4038113
    journal fristpage41009
    journal lastpage041009-5
    treeJournal of Electronic Packaging:;2017:;volume( 139 ):;issue: 004
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian