Show simple item record

contributor authorBaïri
contributor authorAbderrahmane;Chanetz
contributor authorBruno;Millán-García
contributor authorJ. A.
date accessioned2017-12-30T11:44:08Z
date available2017-12-30T11:44:08Z
date copyright10/25/2017 12:00:00 AM
date issued2017
identifier issn1043-7398
identifier otherep_139_04_041009.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4242993
description abstractThe junction temperature of the quad flat nonlead (QFN) electronic devices equipping embarked assemblies may be controlled so that it does not exceed the maximum value recommended by the manufacturer. The packaging design is then important to ensure correct operation and high reliability, given the significant power generated during operation and the inclination angle of the packages during the flight. It is particularly important when thermoregulation is achieved by means of natural convection. The objective of this study is to examine the influence of the adhesive paste used to connect the Die of the QFN with its base. The study deals with three devices among the most used in the conventional arrangements: the QFN16, 32, and 64. A three-dimensional (3D) numerical solution based on the control volume formulation allows to determine their thermal behavior for generated power ranging from 0.1 to 1.0 W by steps of 0.1 W and inclination angle varying between 0 deg (horizontal position) and 90 deg (vertical position) by steps of 15 deg. A wide range of the paste’s thermal conductivity has been considered, varying between −80% and +100% of its average value, measured by means of the transient plane source (TPS) method. The numerical results confirmed by measurements show that the junction temperature strongly increases when the conductivity of the paste decreases. The temperature is moderately reduced when the paste is thermally more conductive. Relationships are proposed to calculate the junction temperature for the three considered devices, according to the generated power, the inclination angle, and the relative paste’s thermal conductivity.
publisherThe American Society of Mechanical Engineers (ASME)
titleEmbarked Quad Flat Nonlead 16, 32, and 64 Electronic Devices Subjected to Free Convection: Influence of the Adhesive Paste on the Junction Temperature
typeJournal Paper
journal volume139
journal issue4
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4038113
journal fristpage41009
journal lastpage041009-5
treeJournal of Electronic Packaging:;2017:;volume( 139 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record