Heterogeneous Multisensor Fusion for Mobile Platform Three-Dimensional Pose EstimationSource: Journal of Dynamic Systems, Measurement, and Control:;2017:;volume( 139 ):;issue: 007::page 71002DOI: 10.1115/1.4035452Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Precise, robust, and consistent localization is an important subject in many areas of science such as vision-based control, path planning, and simultaneous localization and mapping (SLAM). To estimate the pose of a platform, sensors such as inertial measurement units (IMUs), global positioning system (GPS), and cameras are commonly employed. Each of these sensors has their strengths and weaknesses. Sensor fusion is a known approach that combines the data measured by different sensors to achieve a more accurate or complete pose estimation and to cope with sensor outages. In this paper, a three-dimensional (3D) pose estimation algorithm is presented for a unmanned aerial vehicle (UAV) in an unknown GPS-denied environment. A UAV can be fully localized by three position coordinates and three orientation angles. The proposed algorithm fuses the data from an IMU, a camera, and a two-dimensional (2D) light detection and ranging (LiDAR) using extended Kalman filter (EKF) to achieve accurate localization. Among the employed sensors, LiDAR has not received proper attention in the past; mostly because a two-dimensional (2D) LiDAR can only provide pose estimation in its scanning plane, and thus, it cannot obtain a full pose estimation in a 3D environment. A novel method is introduced in this paper that employs a 2D LiDAR to improve the full 3D pose estimation accuracy acquired from an IMU and a camera, and it is shown that this method can significantly improve the precision of the localization algorithm. The proposed approach is evaluated and justified by simulation and real world experiments.
|
Show full item record
| contributor author | Deilamsalehy, Hanieh | |
| contributor author | Havens, Timothy C. | |
| contributor author | Manela, Joshua | |
| date accessioned | 2017-11-25T07:20:47Z | |
| date available | 2017-11-25T07:20:47Z | |
| date copyright | 2017/18/4 | |
| date issued | 2017 | |
| identifier issn | 0022-0434 | |
| identifier other | ds_139_07_071002.pdf | |
| identifier uri | http://138.201.223.254:8080/yetl1/handle/yetl/4236658 | |
| description abstract | Precise, robust, and consistent localization is an important subject in many areas of science such as vision-based control, path planning, and simultaneous localization and mapping (SLAM). To estimate the pose of a platform, sensors such as inertial measurement units (IMUs), global positioning system (GPS), and cameras are commonly employed. Each of these sensors has their strengths and weaknesses. Sensor fusion is a known approach that combines the data measured by different sensors to achieve a more accurate or complete pose estimation and to cope with sensor outages. In this paper, a three-dimensional (3D) pose estimation algorithm is presented for a unmanned aerial vehicle (UAV) in an unknown GPS-denied environment. A UAV can be fully localized by three position coordinates and three orientation angles. The proposed algorithm fuses the data from an IMU, a camera, and a two-dimensional (2D) light detection and ranging (LiDAR) using extended Kalman filter (EKF) to achieve accurate localization. Among the employed sensors, LiDAR has not received proper attention in the past; mostly because a two-dimensional (2D) LiDAR can only provide pose estimation in its scanning plane, and thus, it cannot obtain a full pose estimation in a 3D environment. A novel method is introduced in this paper that employs a 2D LiDAR to improve the full 3D pose estimation accuracy acquired from an IMU and a camera, and it is shown that this method can significantly improve the precision of the localization algorithm. The proposed approach is evaluated and justified by simulation and real world experiments. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Heterogeneous Multisensor Fusion for Mobile Platform Three-Dimensional Pose Estimation | |
| type | Journal Paper | |
| journal volume | 139 | |
| journal issue | 7 | |
| journal title | Journal of Dynamic Systems, Measurement, and Control | |
| identifier doi | 10.1115/1.4035452 | |
| journal fristpage | 71002 | |
| journal lastpage | 071002-8 | |
| tree | Journal of Dynamic Systems, Measurement, and Control:;2017:;volume( 139 ):;issue: 007 | |
| contenttype | Fulltext |