On Pastewka and Robbins' Criterion for Macroscopic Adhesion of Rough SurfacesSource: Journal of Tribology:;2017:;volume( 139 ):;issue: 003::page 31404Author:Ciavarella, M.
DOI: 10.1115/1.4034530Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Pastewka and Robbins (2014, “Contact Between Rough Surfaces and a Criterion for Macroscopic Adhesion,” Proc. Natl. Acad. Sci., 111(9), pp. 3298–3303) recently have proposed a criterion to distinguish when two surfaces will stick together or not and suggested that it shows quantitative and qualitative large conflicts with asperity theories. However, a comparison with asperity theories is not really attempted, except in pull-off data which show finite pull-off values in cases where both their own criterion and an asperity based one seem to suggest nonstickiness, and the results are in these respects inconclusive. Here, we find that their criterion corresponds very closely to an asperity model one (provided we use their very simplified form of the Derjaguin–Muller–Toporov (DMT) adhesion regime which introduces a dependence on the range of attractive forces) when bandwidth α is small, but otherwise involves a root-mean-square (RMS) amplitude of roughness reduced by a factor α. Therefore, it implies that the stickiness of any rough surface is the same as that of the surface where practically all the wavelength components of roughness are removed except the very fine ones.
|
Collections
Show full item record
| contributor author | Ciavarella, M. | |
| date accessioned | 2017-11-25T07:19:36Z | |
| date available | 2017-11-25T07:19:36Z | |
| date copyright | 2016/30/11 | |
| date issued | 2017 | |
| identifier issn | 0742-4787 | |
| identifier other | trib_139_03_031404.pdf | |
| identifier uri | http://138.201.223.254:8080/yetl1/handle/yetl/4235895 | |
| description abstract | Pastewka and Robbins (2014, “Contact Between Rough Surfaces and a Criterion for Macroscopic Adhesion,” Proc. Natl. Acad. Sci., 111(9), pp. 3298–3303) recently have proposed a criterion to distinguish when two surfaces will stick together or not and suggested that it shows quantitative and qualitative large conflicts with asperity theories. However, a comparison with asperity theories is not really attempted, except in pull-off data which show finite pull-off values in cases where both their own criterion and an asperity based one seem to suggest nonstickiness, and the results are in these respects inconclusive. Here, we find that their criterion corresponds very closely to an asperity model one (provided we use their very simplified form of the Derjaguin–Muller–Toporov (DMT) adhesion regime which introduces a dependence on the range of attractive forces) when bandwidth α is small, but otherwise involves a root-mean-square (RMS) amplitude of roughness reduced by a factor α. Therefore, it implies that the stickiness of any rough surface is the same as that of the surface where practically all the wavelength components of roughness are removed except the very fine ones. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | On Pastewka and Robbins' Criterion for Macroscopic Adhesion of Rough Surfaces | |
| type | Journal Paper | |
| journal volume | 139 | |
| journal issue | 3 | |
| journal title | Journal of Tribology | |
| identifier doi | 10.1115/1.4034530 | |
| journal fristpage | 31404 | |
| journal lastpage | 031404-5 | |
| tree | Journal of Tribology:;2017:;volume( 139 ):;issue: 003 | |
| contenttype | Fulltext |