YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Applied Mechanics
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Applied Mechanics
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Development of an Active Curved Beam Model—Part II: Kinetics and Internal Activation

    Source: Journal of Applied Mechanics:;2017:;volume( 084 ):;issue: 006::page 61003
    Author:
    Murakami, Hidenori
    DOI: 10.1115/1.4036317
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Utilizing the kinematics, presented in the Part I, an active large deformation beam model for slender, flexible, or soft robots is developed from the d'Alembert's principle of virtual work, which is derived for three-dimensional elastic solids from Hamilton's principle. This derivation is accomplished by refining the definition of the Cauchy stress tensor as a vector-valued 2-form to exploit advanced geometrical operations available for differential forms. From the three-dimensional principle of virtual work, both the beam principle of virtual work and beam equations of motion with consistent boundary conditions are derived, adopting the kinematic assumption of rigid cross sections of a deforming beam. In the derivation of the beam model, Élie Cartan's moving frame method is utilized. The resulting large deformation beam equations apply to both passive and active beams. The beam equations are validated with the previously reported results expressed in vector form. To transform passive beams to active beams, constitutive relations for internal actuation are presented in rate form. Then, the resulting three-dimensional beam models are reduced to an active planar beam model. To illustrate the deformation due to internal actuation, an active Timoshenko beam model is derived by linearizing the nonlinear planar equations. For an active, simply supported Timoshenko beam, the analytical solution is presented. Finally, a linear locomotion of a soft inchworm-inspired robot is simulated by implementing active C1 beam elements in a nonlinear finite element (FE) code.
    • Download: (1.096Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Development of an Active Curved Beam Model—Part II: Kinetics and Internal Activation

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/4234119
    Collections
    • Journal of Applied Mechanics

    Show full item record

    contributor authorMurakami, Hidenori
    date accessioned2017-11-25T07:16:40Z
    date available2017-11-25T07:16:40Z
    date copyright2017/18/4
    date issued2017
    identifier issn0021-8936
    identifier otherjam_084_06_061003.pdf
    identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234119
    description abstractUtilizing the kinematics, presented in the Part I, an active large deformation beam model for slender, flexible, or soft robots is developed from the d'Alembert's principle of virtual work, which is derived for three-dimensional elastic solids from Hamilton's principle. This derivation is accomplished by refining the definition of the Cauchy stress tensor as a vector-valued 2-form to exploit advanced geometrical operations available for differential forms. From the three-dimensional principle of virtual work, both the beam principle of virtual work and beam equations of motion with consistent boundary conditions are derived, adopting the kinematic assumption of rigid cross sections of a deforming beam. In the derivation of the beam model, Élie Cartan's moving frame method is utilized. The resulting large deformation beam equations apply to both passive and active beams. The beam equations are validated with the previously reported results expressed in vector form. To transform passive beams to active beams, constitutive relations for internal actuation are presented in rate form. Then, the resulting three-dimensional beam models are reduced to an active planar beam model. To illustrate the deformation due to internal actuation, an active Timoshenko beam model is derived by linearizing the nonlinear planar equations. For an active, simply supported Timoshenko beam, the analytical solution is presented. Finally, a linear locomotion of a soft inchworm-inspired robot is simulated by implementing active C1 beam elements in a nonlinear finite element (FE) code.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleDevelopment of an Active Curved Beam Model—Part II: Kinetics and Internal Activation
    typeJournal Paper
    journal volume84
    journal issue6
    journal titleJournal of Applied Mechanics
    identifier doi10.1115/1.4036317
    journal fristpage61003
    journal lastpage061003-17
    treeJournal of Applied Mechanics:;2017:;volume( 084 ):;issue: 006
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian