Show simple item record

contributor authorMurakami, Hidenori
date accessioned2017-11-25T07:16:40Z
date available2017-11-25T07:16:40Z
date copyright2017/18/4
date issued2017
identifier issn0021-8936
identifier otherjam_084_06_061003.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234119
description abstractUtilizing the kinematics, presented in the Part I, an active large deformation beam model for slender, flexible, or soft robots is developed from the d'Alembert's principle of virtual work, which is derived for three-dimensional elastic solids from Hamilton's principle. This derivation is accomplished by refining the definition of the Cauchy stress tensor as a vector-valued 2-form to exploit advanced geometrical operations available for differential forms. From the three-dimensional principle of virtual work, both the beam principle of virtual work and beam equations of motion with consistent boundary conditions are derived, adopting the kinematic assumption of rigid cross sections of a deforming beam. In the derivation of the beam model, Élie Cartan's moving frame method is utilized. The resulting large deformation beam equations apply to both passive and active beams. The beam equations are validated with the previously reported results expressed in vector form. To transform passive beams to active beams, constitutive relations for internal actuation are presented in rate form. Then, the resulting three-dimensional beam models are reduced to an active planar beam model. To illustrate the deformation due to internal actuation, an active Timoshenko beam model is derived by linearizing the nonlinear planar equations. For an active, simply supported Timoshenko beam, the analytical solution is presented. Finally, a linear locomotion of a soft inchworm-inspired robot is simulated by implementing active C1 beam elements in a nonlinear finite element (FE) code.
publisherThe American Society of Mechanical Engineers (ASME)
titleDevelopment of an Active Curved Beam Model—Part II: Kinetics and Internal Activation
typeJournal Paper
journal volume84
journal issue6
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.4036317
journal fristpage61003
journal lastpage061003-17
treeJournal of Applied Mechanics:;2017:;volume( 084 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record