Journal of Fluids Engineering: Recent submissions
Now showing items 8341-8360 of 9024
-
The Effect of Taylor Vortex Flow on the Radial Forces in an Annulus Having Variable Eccentricity and Axial Flow
(The American Society of Mechanical Engineers (ASME), 1978)Results are presented in dimensionless form as obtained in an experimental study of the resultant radial force variation in an eccentric annulus formed by a stationary outer cylinder and a ... -
Reynolds Number Dependence of Skin Friction and Other Bulk Flow Variables in Two-Dimensional Rectangular Duct Flow
(The American Society of Mechanical Engineers (ASME), 1978)The Reynolds number dependence of Cf , Uo , H and other bulk flow parameters in “two dimensional” (high aspect ratio) rectangular duct flow is explored and the empirical relations Cf = 0.073 ... -
The Toroid Contact Roller Test as Applied to the Study of Bearing Materials
(The American Society of Mechanical Engineers (ASME), 1962)An understanding of the basic mechanics and statistical variables of the contact roller test as it is applied to surface fatigue phenomena was obtained. One hundred ninety-four contact rollers ... -
Turbulence Measurements in a Separated and Reattached Flow Over a Blunt Flat Plate
(The American Society of Mechanical Engineers (ASME), 1978)Turbulence measurements were made in the separated, reattached, and redeveloped regions of a two-dimensional incompressible air flow over a flat plate with finite thickness and blunt leading edge. ... -
Calculation of Turbulent Shear Flows: Status and Ten-Year Outlook
(The American Society of Mechanical Engineers (ASME), 1978) -
The Dynamics of Thin Liquid Films in Rotating Tubes: Approximate Analysis
(The American Society of Mechanical Engineers (ASME), 1978)The dynamics of a thin liquid film flowing through a pipe rotating about an axis perpendicular to the pipe axis are studied. Static pressure is assumed constant along the pipe and the axial ... -
Discussion: “Quasi Two-Dimensional Analysis of a Flow Through a Centrifugal Pump Impeller” (Kumar, T. C. Mohana, and Rao, Y. V. N., 1977, ASME J. Fluids Eng., 99, pp. 687–692)
(The American Society of Mechanical Engineers (ASME), 1978) -
Laminar Throughflow of Varying-Quality Steam Between Corotating Disks
(The American Society of Mechanical Engineers (ASME), 1978)A local analysis was made of the laminar throughflow between corotating disks of a Newtonian vapor containing liquid droplets. Such a flow is of practical interest in multiple-disk turbomachinery, ... -
Fluid Lubrication Theory of Roller Bearing—Part II: Fluid Lubrication Theory Applied to Roller Bearing
(The American Society of Mechanical Engineers (ASME), 1962)Using the theory for two rotating cylinders in contact obtained in Part I, the fluid lubrication theory of roller bearings for Newtonian and non-Newtonian lubricants was developed in Part II ... -
Discussion: “Prediction of the Three-Dimensional Velocity Field of a Deflected Turbulent Jet” (Pantakar, S. V., Kasu, D. K., and Alpay, S. A., 1977, ASME J. Fluids Eng., 99, pp. 758–762)
(The American Society of Mechanical Engineers (ASME), 1978) -
Discussion: “A Flow Study in Radial Inflow Turbine Scroll-Nozzle Assembly” (Hamed, A., Baskharone, E., and Tabakoff, W., 1978, ASME J. Fluids Eng., 100, pp. 31–36)
(The American Society of Mechanical Engineers (ASME), 1978) -
Discussion: “Constrained Flow Past Cavitating Bluff Bodies” (Ramamurthy, A. S., and Bhaskaran, P., 1977, ASME J. Fluids Eng., 99, pp. 717–726)
(The American Society of Mechanical Engineers (ASME), 1978) -
Discussion: “Liquid-Solid Impact Calculations With Triangular Elements” (Johnson, G. R., 1977, ASME J. Fluids Eng., 99, pp. 598–600)
(The American Society of Mechanical Engineers (ASME), 1978) -
Experiments on the Dynamic Behavior of Cavitating Pumps
(The American Society of Mechanical Engineers (ASME), 1978)This paper describes experiments performed to measure the dynamic transfer matrices for cavitating (and noncavitating) pumps. These transfer matrices describe the relationship between small linear ... -
A Correlation for Laminar Hydrodynamic Entry Length Solutions for Circular and Noncircular Ducts
(The American Society of Mechanical Engineers (ASME), 1978)Laminar hydrodynamic entry length solutions for circular and noncircular ducts are essential in proper design of compact heat exchangers and other heat transfer and fluid flow devices. A closed ... -
A Procedure for Computation of Fully Stalled Flows in Two-Dimensional Passages
(The American Society of Mechanical Engineers (ASME), 1978)A procedure is described for computation of incompressible, steady, two-dimensional flows in fully-stalled diffusers with plenum exit. The procedure is successful in predicting pressure distributions ... -
Discussion: “Periodic Discontinuities in the Acceleration of Spheres in Free Flight” (Tyler, A. L., and Salt, D. L., 1978, ASME J. Fluids Eng., 100, pp. 17–21)
(The American Society of Mechanical Engineers (ASME), 1978) -
A Partially Cavitating Hydrofoil of Finite Span
(The American Society of Mechanical Engineers (ASME), 1978) -
Solutions of Laminar Jet Flow Problems for Non-Newtonian Power-Law Fluids
(The American Society of Mechanical Engineers (ASME), 1978)Solutions are presented for laminar flow of non-Newtonian power-law fluids. The flow configurations cover the two-dimensional plane and radial free jets, the axisymmetrical (circular) free jet, ... -
Availability Ratio for Performance of Pipeline Components in Two-Phase Flow
(The American Society of Mechanical Engineers (ASME), 1978)A new method is presented which uses the steady flow availability function to analyze the efficiency with which energy can be transmitted in a pipeline. It is suggested that the availability ...