Journal of Manufacturing Science and Engineering: Recent submissions
Now showing items 1741-1760 of 7723
-
Discussion: “On the Analysis of Random Errors in Precision Grinding Operations” (Hahn, Robert S., 1961, ASME J. Eng. Ind., 83, pp. 131–138)
(The American Society of Mechanical Engineers (ASME), 1961) -
Analytical and Experimental Studies of a Mechanical Pulse Generator
(The American Society of Mechanical Engineers (ASME), 1974)A simple, low-cost mechanical pulse generator has numerous applications in laboratory investigations and field tests of structures. Applications may include shock tests, transient load simulations, ... -
Experimental Investigation of a Simple Squeeze Film Damper
(The American Society of Mechanical Engineers (ASME), 1974)This paper describes an experimental investigation of a squeeze film damper for the control of rotor amplitudes. From direct measurements of the transmitted force and the velocity of the damper ... -
Torsional Response of Internal Combustion Engines
(The American Society of Mechanical Engineers (ASME), 1974)A digital simulation technique for determining the torsional response of internal combustion engines subject to constant and pulsating end item torques is described herein. A refined mathematical ... -
A Sparse Matrix Technique for Fundamental Mode Analysis in Power Transmission Systems
(The American Society of Mechanical Engineers (ASME), 1974)A method is presented that allows the rapid prediction of the fundamental frequency and mode shape for a power transmission system. It is based on a programming technique taken from the ... -
Surface Temperature and Scoring Resistance of Heavy-Duty Gears
(The American Society of Mechanical Engineers (ASME), 1974)The surface temperature on spur gear teeth is measured by the newly developed dynamic thermocouple method. From a large number of the results an experimental equation for the surface temperature ... -
The Laboratory Simulation of Vehicle Service Stress
(The American Society of Mechanical Engineers (ASME), 1974)A simulation technique which will enable the response of vehicle components or complete vehicles to be reproduced in the laboratory is presented. For the case of a complete four wheeled vehicle ... -
Electromechanical Simulation of Helicopter Blade Responses to Random Excitation During Forward Flight
(The American Society of Mechanical Engineers (ASME), 1974)The response of a model helicopter rotor blade to random excitation while in simulated forward flight is studied analytically and experimentally by means of an electromechanical apparatus. ... -
Dynamic Behavior of Heavy-Loaded Spur Gears
(The American Society of Mechanical Engineers (ASME), 1974)In order to analyze causes of failures of heavy-loaded spur gears, the authors deal with their dynamic characteristics by considering a vibrating system composed of an effective mass of gear ... -
An Improved Determination of the Elastic Compliance of a Spur Gear Tooth Acted on by a Concentrated Load
(The American Society of Mechanical Engineers (ASME), 1974)The elastic compliance of a spur gear tooth acted on by a concentrated load is determined through the use of appropriate stress functions resulting from the complex transformation of the tooth ... -
Discussion: “A New Test Method for Determination of Spinnability of Metals” (Kegg, Richard L., 1961, ASME J. Eng. Ind., 83, pp. 119–124)
(The American Society of Mechanical Engineers (ASME), 1961) -
Nonlinear Vibration Analysis of Elastic Four-Bar Linkages
(The American Society of Mechanical Engineers (ASME), 1974)A method of kineto-elastodynamic analysis is developed employing lumped parameter models for simulating moving mechanism components subject to elastic bending vibrations. The mechanism analyzed is ... -
Response Spectra of Strain Hardening Structural Systems to Earthquake Motions
(The American Society of Mechanical Engineers (ASME), 1974)The effect of strain hardening in limiting the forces developed in structures subjected to earthquake motions below those of the elastic behavior is investigated by treating a single degree of ... -
Surface Durability of Spur Gears at Hertzian Stresses Over Shakedown Limit
(The American Society of Mechanical Engineers (ASME), 1974)Using a new type of gear-load testing machine and a disk-type rolling fatigue testing machine designed and made by the authors, the upper limits of Hertzian contact stress allowable on rolling ... -
Discussion: “Stability and Kinematic Accuracy of Hydraulic Copying Mechanisms in Metal Cutting” (Mansour, W. M., Osman, M. O. M., and Gladwell, G. M. L., 1973, ASME J. Eng. Ind., 95, pp. 787–793)
(The American Society of Mechanical Engineers (ASME), 1974) -
Discussion: “Closed Form Displacement Relationships of Single and Multi-Loop Six-Link Spatial Mechanisms” (Soni, A. H., Dukkipati, R. V., and Huang, M., 1973, ASME J. Eng. Ind., 95, pp. 709–716)
(The American Society of Mechanical Engineers (ASME), 1974) -
Efficiency of Gear Transmissions With Flexibly Connected Gears Subjected to Axial Vibrations
(The American Society of Mechanical Engineers (ASME), 1974)The axial vibrational motion of one of the engaged gears increases the mechanical efficiency of a gear system by reducing the frictional resistance in the plane of gear rotation. The purpose ... -
Discussion: “Investigation of Pulse Tube Refrigeration” (Narayankhedkar, K. G., and Mane, V. D., 1973, ASME J. Eng. Ind., 95, pp. 373–378)
(The American Society of Mechanical Engineers (ASME), 1974) -
The Orbital Movement and the Damping of the Fluidelastic Vibration of Tube Banks Due to Vortex Formation: Part 2—Criterion for the Fluidelastic Orbital Vibration of Tube Arrays
(The American Society of Mechanical Engineers (ASME), 1974)The phenomenon on the tubes in a tube row, which vibrate alternately along the row in the transverse and stream-wise directions, will be explained by a vortex model. This model consists of ... -
Discussion: “A New Random Data Description and Its Use in Transferring Road Roughness to Vehicle Response” (Wambold, J. C., Park, W. H., and Vashlishan, R. G., 1974, ASME J. Eng. Ind., 96, pp. 676–679)
(The American Society of Mechanical Engineers (ASME), 1974)