Journal of Manufacturing Science and Engineering: Recent submissions
Now showing items 1701-1720 of 7723
-
A New Random Data Description and Its Use in Transferring Road Roughness to Vehicle Response
(The American Society of Mechanical Engineers (ASME), 1974)The initial portion of the paper discusses the more conventional method of obtaining a vehicle transfer function where phase and magnitude are determined by dividing the cross spectral density ... -
Deflections in Radially Loaded Thin Elastic Rings
(The American Society of Mechanical Engineers (ASME), 1974)Equations are developed for determining radial deflections in thin elastic circular rings which are subjected to any number of radial load sets or repeated distributed radial load functions; ... -
A Rotor-Fixed Modal Simulation Model for Flexible Rotating Equipment
(The American Society of Mechanical Engineers (ASME), 1974)A transient, flexible rotor formulation is derived on the basis of a representation previously employed to simulate the motion of flexible spinning spacecraft. The distributed parameter characteristics ... -
Discussion: “Hyperbaric Chamber Lighting” (Canty, J. M., 1974, ASME J. Eng. Ind., 96, pp. 281–284)
(The American Society of Mechanical Engineers (ASME), 1974) -
Erratum: “An Interdisciplinary Lubrication Theory for Gears” (Journal of Engineering for Industry, 1973, 95, pp. 1178–1195)
(The American Society of Mechanical Engineers (ASME), 1974) -
Study on Hobs for Cutting Internal Gears
(The American Society of Mechanical Engineers (ASME), 1974) -
An Extension of the Holzer Method for Redundant Drive Trains
(The American Society of Mechanical Engineers (ASME), 1974)A method is described for the determination of natural frequencies and mode shapes of closed drive trains. It is an extension of the Holzer method to a redundant system. The “error” for a ... -
Erratum: “A Mathematical Programming Technique for the Evaluation of Load Distribution and Optimal Modifications for Gear Systems” (Journal of Engineering for Industry, 1973, 95, pp. 1115–1122)
(The American Society of Mechanical Engineers (ASME), 1974) -
Discussion: “Free Machining Steel: III—Cutting Forces; Surface Finish and Chip Formation” (Shaw, M. C., Usui, E., and Smith, P. A., 1961, ASME J. Eng. Ind., 83, pp. 181–192)
(The American Society of Mechanical Engineers (ASME), 1961) -
Discussion: “Free Machining Steel: I—Tool-Life Characteristics of Resulfurized Steel” (Shaw, M. C., Cook, N. H., and Smith, P. A., 1961, ASME J. Eng. Ind., 83, pp. 163–172)
(The American Society of Mechanical Engineers (ASME), 1961) -
Discussion: “A Milling Torquemeter of Planetary-Gear Design” (Roubik, J. R., 1961, ASME J. Eng. Ind., 83, pp. 155–161)
(The American Society of Mechanical Engineers (ASME), 1961) -
Penetration Rates and Stability of Motions of a Harmonically Forced Fore-Aft Vibrating Plow
(The American Society of Mechanical Engineers (ASME), 1974)A fore-aft vibrating plow with applied harmonic and bias forces, and with soil-blade interaction modeled by a constant tip resistance in uncut soil and zero skin friction is studied analytically. ... -
Nonlinear Truck Ride Analysis
(The American Society of Mechanical Engineers (ASME), 1974)The nonlinear vibratory motions of a three-axle semitrailer truck were investigated via the use of a digital computer. The nonlinear equations of motion are presented and a method of numerical ... -
Vibration Control Using Semi-Active Force Generators
(The American Society of Mechanical Engineers (ASME), 1974)A type of force generator which can respond to general feedback signals from a vibrating system in order to control the vibration but which does not require the power supply of a servomechanism ... -
Experimental Evaluation of the Exact Point-Speed and Least-Squares Procedures for Flexible Rotor Balancing by the Influence Coefficient Method
(The American Society of Mechanical Engineers (ASME), 1974)An experimental test program was conducted to extend the verified operating region of the Influence Coefficient Method’s Exact Point-Speed procedure for balancing of flexible rotating machinery. ... -
Synthesis of Solid Elastic Horns
(The American Society of Mechanical Engineers (ASME), 1974)Synthesis of the profile of a solid elastic horn from its matrix of transfer functions is examined. Two methods of synthesis are developed. The first method makes use of the Inverse Sturm-Liouville ... -
Sinusoidal Response of Composite-Material Plates With Material Damping
(The American Society of Mechanical Engineers (ASME), 1974)A general forced-vibration analysis is presented for laminated anisotropic rectangular plates including material damping. The theory used is the laminated version of the Mindlin plate theory and ... -
Hydrodynamic Mass Matrix for a Multibodied System
(The American Society of Mechanical Engineers (ASME), 1974)A matrix technique is developed herein for generating the hydrodynamic mass matrix associated with a multimass system immersed in a liquid environment. The technique assumes that the liquid ... -
On the Stability of Porous Journal Bearings
(The American Society of Mechanical Engineers (ASME), 1974)This investigation deals with the stability characteristics of lubricated porous journal bearings. Using the short-bearing approximation and a fully cavitated film, the regions of stability are ... -
Vibratory Locomotion
(The American Society of Mechanical Engineers (ASME), 1974)A new method for accomplishing land locomotion by vibrating a mass attached to a skid has been developed. The mass oscillates in an inclined direction, upward and forward, downward and backward. ...