Journal of Pressure Vessel Technology: Recent submissions
Now showing items 4481-4500 of 4506
-
Discussion: “Improved Construction of Multilayer Vessels to Apply the ASME Code Section 8, Division 2” (Yamauchi, T., 1975, ASME J. Pressure Vessel Technol., 97, pp. 14–21)
(The American Society of Mechanical Engineers (ASME), 1975) -
Methodology for Use of Acoustic Emission Examination During Application of Pressure
(The American Society of Mechanical Engineers (ASME), 1975) -
Analysis of Strength and Residual Stresses in Filament Reinforced Aluminum Cylinders
(The American Society of Mechanical Engineers (ASME), 1975)This paper describes a study of aluminum gas cylinders used in underwater manned vehicles. A determination was made of the relative increase in one cycle burst pressure and fatigue life of ... -
Finite Element Analysis of Perforated Plates Containing Triangular Penetration Patterns of 5 and 10 Percent Ligament Efficiency
(The American Society of Mechanical Engineers (ASME), 1975)Two- and three-dimensional finite element models were used to determine elastic stress distributions in plate ligaments for various in-plane, bending, and thermal loadings. Plates containing ... -
Thermomechanical Analysis of the Welding Process Using the Finite Element Method
(The American Society of Mechanical Engineers (ASME), 1975)Analytical models are developed for calculating temperatures, stresses and distortions resulting from the welding process. The models are implemented in finite element formulations and applied to ... -
Wave Propagation in Fluid-Conveying Piping Constructed of Composite Material
(The American Society of Mechanical Engineers (ASME), 1975)An analysis is presented for the propagation of free harmonic waves in fluid-conveying, thin-walled, circular cylindrical shells of orthotropic material. The shell motion is modeled by using the ... -
On Shallow Shells of Transversely Isotropic Materials
(The American Society of Mechanical Engineers (ASME), 1975)This paper presents an improved shell theory for the analysis of shallow shells of composite materials such as pyrolytic graphite, that exhibit certain unusual and complex thermal properties. ... -
Finite Element Study of Pressure Wave Attenuation by Reactor Fuel Subassemblies
(The American Society of Mechanical Engineers (ASME), 1975)The attenuation of pressure waves by the subassembly walls in a reactor core was studied by a two dimensional, finite element program. For these purposes, a hydro-dynamic finite element was ... -
The Nonlinear Dynamic Analysis of Shells of Revolution With Asymmetric Properties by the Finite Element Method
(The American Society of Mechanical Engineers (ASME), 1975)A large deflection elastic-plastic analysis for general structures by the finite element method is presented. A Von Mises yield condition, its associated flow rule, and isotropic hardening are ... -
Displacements and Stresses in Precision Welded Bellows
(The American Society of Mechanical Engineers (ASME), 1975)A mathematical method is derived which permits calculation, based upon linear shell theory, of all stresses and displacements in a precision welded bellows having any number of layers, when ... -
Fracture of Defects Approaching a Free Surface
(The American Society of Mechanical Engineers (ASME), 1975)A testing program has been run using off-centered-cracked (OCC) plate specimens to demonstrate the fracture characteristics of tunnel defects in specimens with various ligament lengths between the ... -
Plastic Strength of Perforated Plates With Square Penetration Patterns
(The American Society of Mechanical Engineers (ASME), 1975)The sheet perforated with circular holes arranged in a square penetration pattern anp subjected to in-plane biaxial stress is investigated. Discontinuous fields of stress are used to obtain the ... -
Strength of Reinforced Concrete Chambers Under External Pressure
(The American Society of Mechanical Engineers (ASME), 1975)A study was made to establish the strength of concrete chambers subjected to external pressure with special reference to the reinforced concrete cylindrical tanks. The finite element method as ... -
A J-Integral Analysis to Fracture Toughness of Plates Containing Surface Cracks
(The American Society of Mechanical Engineers (ASME), 1975)The J-integral approach was applied to plates containing surface flaws type of cracks. The experimental procedure followed in this investigation was based on a proposed method by Begley and ... -
Elastic-Plastic Fracture Toughness: A Comparison of J-Integral and Crack Opening Displacement Characterizations
(The American Society of Mechanical Engineers (ASME), 1975)The geometry dependence of the J-integral and crack opening displacement at fracture initiation, Ji and (COD)i , is examined for HY-80 steel using precracked bend specimens having thicknesses ... -
Plane Strain Crack Arrest Characterization of Steels
(The American Society of Mechanical Engineers (ASME), 1975)The data presently available on the plane strain crack arrest toughness (KIa ) of steels are reviewed, using as a definition of KIa the stress intensity factor, K, a short time after a ... -
Inelastic Analysis of a Straight Tube Under Combined Bending, Pressure and Thermal Loads
(The American Society of Mechanical Engineers (ASME), 1975)This paper describes the formulation of and solution to the problem of elastic-plastic-creep analysis of a thin circular cylinder subjected to combined bending, pressure and thermal loads. These ... -
Analysis of Defects in Welds
(The American Society of Mechanical Engineers (ASME), 1975)The judgment of welds with defects in reactor components is done by nondestructive as well as destructive material testing, stress analysis, and fracture mechanics. The following investigations ... -
Current Status of Conversion of the ASME Boiler and Pressure Vessel Code to SI (Metric) Units
(The American Society of Mechanical Engineers (ASME), 1975) -
Elevated Temperature Fatigue Behavior of 2 1/4 Cr-1 Mo Steel
(The American Society of Mechanical Engineers (ASME), 1975)Results are reported for a number of load and strain controlled fatigue tests conducted over the temperature range of room temperature to 1000°F (538°C). Cyclic hardening and softening ...