Journal of Engineering for Gas Turbines and Power: Recent submissions
Now showing items 4701-4720 of 9564
-
An Analytical and Experimental Evaluation of the Pressure-Drop Losses in the Stirling Cycle
(The American Society of Mechanical Engineers (ASME), 1970)An analysis of the effects of pressure drop in the heat-exchange components of a Stirling cycle has been made and successfully applied to an experimental refrigerator. Data are presented for ... -
Optimization of Solar Terrestrial Power Production Using Heat Engines
(The American Society of Mechanical Engineers (ASME), 1970)Mathematical model and computer programs have been developed for the analysis of the economic performance of a terrestrial solar power system using heat engines. Various combinations of cycle, ... -
The Design and Mechanical Performance Characteristics of the Zero Power Plutonium Reactor
(The American Society of Mechanical Engineers (ASME), 1970)The Zero Power Plutonium Reactor (ZPPR) is a fast experimental reactor that operates at very low power levels and is used to simulate proposed fast power plutonium reactors in the 1000-MW ... -
Combustion Roar of Turbulent Diffusion Flames
(The American Society of Mechanical Engineers (ASME), 1970)Pertinent literature is reviewed and experimental data on the combustion roar of turbulent, natural-gas, diffusion flames are presented. These data were obtained on two experimental burner rigs, ... -
Design of Condenser Cooling Water System for a Nuclear Power Plant Located on a Large Estuary
(The American Society of Mechanical Engineers (ASME), 1970)A coordinated program is described for developing information needed for designing a condenser cooling water system for a nuclear power plant located on a large estuary to meet State water ... -
Electrical Measurement of Flow Rate of Pulverized Coal Suspension
(The American Society of Mechanical Engineers (ASME), 1970)Electrostatic probes for indicating instantaneous flow rate of pulverized coal suspension in a pipe were devised and tested. Experiments were performed on flow systems consisting of 2 and 5-in-ID ... -
Some Improved Steam Property Calculation Procedures
(The American Society of Mechanical Engineers (ASME), 1970) -
SO2 Pickup by Limestone and Dolomite Particles in Flue Gas
(The American Society of Mechanical Engineers (ASME), 1970)An investigation was made of the reaction between SO2 and limestone and dolomite particles in flue gas. Reaction data were generated by exposing the particles to flue gas in a dispersed-phase ... -
Sodium Vapor Deposition in Inert Enclosures
(The American Society of Mechanical Engineers (ASME), 1970)Sodium vapor deposition is acknowledged to be a potential problem in several activities associated with Liquid Metal Fast Breeder Reactors (LMFBRs). Attempts were made to predict sodium evaporation ... -
The Technical Evaluation of a Large Scale Solar Distillation Plant
(The American Society of Mechanical Engineers (ASME), 1970)A theoretical evaluation of the heat and mass transfer interchange in an air-inflated solar still has been studied. Experimental verification tests have been carried out and the results compared ... -
Engine Prime Mover Automation
(The American Society of Mechanical Engineers (ASME), 1970)“Full range” automation control of engine prime movers makes possible the direct conversion of primary fuel sources of liquid or gaseous types to prime mover power with the labor savings ... -
Discussion: “Some Experimental Results of Two Concepts Designed to Increase Turbine Blade Loading” (Lueders, H. G., and Roelke, R. J., 1970, ASME J. Eng. Power, 92, pp. 198–205)
(The American Society of Mechanical Engineers (ASME), 1970) -
Discussion: “The Design and Mechanical Performance Characteristics of the Zero Power Plutonium Reactor” (McCarthy, P. B., and Lawroski, Harry, 1970, ASME J. Eng. Power, 92, pp. 166–172)
(The American Society of Mechanical Engineers (ASME), 1970) -
Discussion: “Electrical Measurement of Flow Rate of Pulverized Coal Suspension” (Cheng, L., Tung, S. K., and Soo, S. L., 1970, ASME J. Eng. Power, 92, pp. 135–148)
(The American Society of Mechanical Engineers (ASME), 1970) -
Discussion: “Some Improved Steam Property Calculation Procedures” (McClintock, R. B., and Silvestri, G. J., 1970, ASME J. Eng. Power, 92, pp. 123–134)
(The American Society of Mechanical Engineers (ASME), 1970) -
Discussion: “SO2 Pickup by Limestone and Dolomite Particles in Flue Gas” (Coutant, R. W., Barrett, R. E., and Lougher, E. H., 1970, ASME J. Eng. Power, 92, pp. 113–121)
(The American Society of Mechanical Engineers (ASME), 1970) -
Discussion: “Sodium Vapor Deposition in Inert Enclosures” (Sutherland, J. D., Markley, R. A., and McKinney, J. L., 1970, ASME J. Eng. Power, 92, pp. 107–111)
(The American Society of Mechanical Engineers (ASME), 1970) -
Discussion: “Engine Prime Mover Automation” (McCune, M. K., 1970, ASME J. Eng. Power, 92, pp. 103–106)
(The American Society of Mechanical Engineers (ASME), 1970) -
The Fluid Dynamics of a Shrouded Disk System With a Radial Outflow of Coolant
(The American Society of Mechanical Engineers (ASME), 1970)This paper describes an experimental study of an air-cooled gas turbine disk using the model of a disk rotating near a shrouded stator. Measurements of pressure distribution, frictional moment, ... -
Heat Transfer and Pumping on a Rotating Disk With Freely Induced and Forced Cooling
(The American Society of Mechanical Engineers (ASME), 1970)An experimental study of the heat transfer characteristics of flows between a high speed rotating disk and a parallel stationary shroud is presented. Flow and disk heat transfer rates have ...