Journal of Aerospace Engineering: Recent submissions
Now showing items 481-500 of 2488
-
Downrange Estimation Based on Powered Explicit Guidance for Pinpoint Lunar Landing
(ASCE, 2021-11-25)Onboard computation of a fuel-optimal steering law is a pivotal technology for future lunar and planetary campaigns with pinpoint landings. This paper proposes a method of downrange estimation based on improved powered ... -
Start Limits and Positive Control of RBCC Inlet
(ASCE, 2021-11-24)A rocket-based combined-cycle (RBCC) inlet is always required to start at a relatively low Mach number in consideration of the fuel consumption in the ejector mode and the comprehensive engine performance throughout the ... -
Attitude Control of a Moving Mass–Actuated UAV Based on Deep Reinforcement Learning
(ASCE, 2021-12-01)A moving mass–actuated unmanned aerial vehicle (MAUAV) is controlled by mass sliders installed inside the airframe and has the advantages of high aerodynamic efficiency and good stealth performance. However, designing a ... -
Preliminary Experimental Investigation of Loading Sequence Effects on Low-Cycle Bending Fatigue
(ASCE, 2021-11-16)Bending fatigue, as one of the impact factors to reduce a metal’s service life, could play a critical role in fatigue life estimation of aerospace components and civil infrastructures, such as in machine gears, splined ... -
Adaptive Air-Data Estimation in Wind Disturbance Based on Flight Data
(ASCE, 2021-11-16)Air-data, recorded in the flight data of civil aviation aircraft, can be disturbed by wind disturbance, thus leading to measurement error. A two-stage air-data estimation in wind disturbance was studied to obtain accurate ... -
Ballistic Impact of Flat-Ended Projectiles against 2024-T351 Plate: Experiments and Modeling
(ASCE, 2021-11-08)Flat-ended projectiles were used to impact three distinct thicknesses of 2024-T351 plate. Ballistic limit velocities were determined, and optical microscopic examination revealed evidence of adiabatic shear bands within ... -
Experimental Study on RP-3 Aviation Fuel Tank Using Oxygen-Consuming Inerting Technology
(ASCE, 2021-10-28)Oxygen-consuming fuel tank inerting technology is a novel technology with a simple structure and a high efficiency for tank explosion suppression based on flameless catalytic combustion. To verify the feasibility of the ... -
Improved Mixed-Mode Bending Test Apparatus through Analytical Modeling and Finite-Element Optimization for Improved Characterization
(ASCE, 2021-10-28)The compliance of the mixed-mode bending (MMB) test fixtures can influence the interlaminar fracture toughness measurements for different mixed-mode ratios in an unpredictable way. The purpose of this article is to introduce ... -
A Continuous Nonlinear Sliding Mode Control with Fractional Operators for Quadrotor UAV Systems in the Presence of Disturbances
(ASCE, 2021-10-28)This paper investigates the robust continuous fractional-order nonlinear sliding mode (RCFONSM) control scheme for controlling a disturbed uncertain quadrotor (DUQ). First, the fractional-order nonsingular terminal sliding ... -
Integrated Thermal Protection System Design for Hypersonic Vehicle Based on New Thermal–Mechanical Method
(ASCE, 2021-10-20)With the development of hypersonic vehicles, considerable attention has been paid to thermal protection systems (TPSs). Among the different types of TPS, integrated TPS (ITPS) has attracted extensive interest because of ... -
Application of Mathematical Modeling to Study Near-Field Pressure Pulsations of a Near-Future Prototype Supersonic Business Aircraft
(ASCE, 2021-10-18)The paper considers practical aspects of mathematical modeling in predictions of the level of near-field pressure pulsations of a near-future prototype supersonic business aircraft. A numerical modeling technique based on ... -
Design Method of Scramjet Nozzles within Predetermined Geometrical Space and Experimental Verification
(ASCE, 2021-10-08)A new design method of scramjet nozzles within predetermined geometrical space is proposed to optimize the nozzle aerodynamic performance. The main characteristic of the proposed method is that the design factors and flow ... -
Improved Electrodynamic Particle-Size Sorting System for Lunar Regolith
(ASCE, 2021-09-27)In situ resource utilization (ISRU) of lunar regolith is indispensable for the success of large-scale and long-term human lunar explosions at lower costs. Many new technologies must be developed to realize efficient ISRU. ... -
Method for On-Orbit Thrust Estimation for Microthrusters Based on Nanosatellites
(ASCE, 2021-11-27)The development of nanosatellites is inseparable from micropropulsion systems, and a micropropulsion system cannot be separated from the evaluation of its micropropulsion performance. Although the ground measurement system ... -
Robust Backstepping Control Based on Neural Network Stochastic Constrained for Three Axes Inertial Stable Platform
(ASCE, 2021-09-30)The closed-loop performance of an inertial stable platform (ISP) affects the operation of navigation in moving objects. In this paper, the issue of high-performance control of ISP is discussed. By proposing a novel ... -
Hydrostatic and Cyclic Pressure Testing of Small-Scale Composite Pipes and Vessels
(ASCE, 2021-09-27)In this study, overlapped biaxial and seamless twill carbon fiber pipes and vessels were manufactured. Steel pressure vessels were repaired with flexible twill and biaxial fabric. The pipes and vessels were subjected to ... -
Dynamics of Frozen Orbit and Its Critical Case in the Zonal Problem
(ASCE, 2021-10-04)This paper investigates the dynamical behaviors of Earth frozen orbits including the critical inclination orbit in the zonal problem with terms of perturbations up to J15. From the mean element theory, an analytical expansion ... -
Projectile Shape Effects in Hypervelocity Impact of Honeycomb-Core Sandwich Structures
(ASCE, 2021-09-24)Honeycomb-core sandwich structures are commonly utilized as orbital debris shielding in unmanned satellites. This study investigated the effects of projectile shape on the ballistic performance of aluminum honeycomb-core ... -
Study on the Wind Environment and Pollution Diffusion of Building Group Based on LES Staggered Joint Arrangement
(ASCE, 2021-09-29)In this paper, computational fluid dynamics (CFD) numerical simulation and wind tunnel tests are used to study the wind environment of typical buildings in coastal cities. Firstly, the geometric three-dimensional model is ... -
Parametric Effect of Blade Surface Blowing on the Reduction of Rotor Blade–Vortex Interaction Noise
(ASCE, 2021-09-23)Reducing rotor blade–vortex interaction (BVI) noise is a major challenge in rotorcraft research. This paper presents a high-resolution numerical study of the effects of blade surface blowing on BVI noise reduction. Using ...