YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASCE
    • Journal of Aerospace Engineering
    • View Item
    •   YE&T Library
    • ASCE
    • Journal of Aerospace Engineering
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Improved Electrodynamic Particle-Size Sorting System for Lunar Regolith

    Source: Journal of Aerospace Engineering:;2021:;Volume ( 035 ):;issue: 001::page 04021115
    Author:
    Hiroyuki Kawamoto
    ,
    Hirofumi Morooka
    ,
    Hiroyuki Nozaki
    DOI: 10.1061/(ASCE)AS.1943-5525.0001371
    Publisher: ASCE
    Abstract: In situ resource utilization (ISRU) of lunar regolith is indispensable for the success of large-scale and long-term human lunar explosions at lower costs. Many new technologies must be developed to realize efficient ISRU. Because particle sorting is one of the essential processes of ISRU, a unique technology has been developed using the balance between electrodynamic and gravitational forces. First, a sorting system using an electrodynamic standing wave was developed. The particles on the parallel-line electrodes were agitated by the electrodynamic force created by the application of a standing wave, and floated small particles at a high altitude were collected in a box located above the electrodes. The experiment and numerical calculation indicated that although a high collecting position was preferable for sorting small particles, a large number of small particles hardly reached a high position and a high yield was not attained. Next, an improved sorting system that uses a traveling wave instead of a standing wave was developed to mitigate the incompatibility. When a four-phase high voltage is applied to the vertically supported parallel-line electrodes, an electrodynamic traveling wave is formed above the electrodes, forcing small regolith particles to move upward at a high position, while large particles are apt to fall. Additionally, particles were fed through a vibrating sieve to break off the aggregated particles. Finally, an averaged particle size of 12  μm and 30% in a yield of particles less than 10  μm particles was attained. The system would be suitable for space applications because it is simple, lightweight, has low power consumption, and does not require any mechanical drive or consumables.
    • Download: (2.320Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Improved Electrodynamic Particle-Size Sorting System for Lunar Regolith

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/4283224
    Collections
    • Journal of Aerospace Engineering

    Show full item record

    contributor authorHiroyuki Kawamoto
    contributor authorHirofumi Morooka
    contributor authorHiroyuki Nozaki
    date accessioned2022-05-07T21:02:08Z
    date available2022-05-07T21:02:08Z
    date issued2021-09-27
    identifier other(ASCE)AS.1943-5525.0001371.pdf
    identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4283224
    description abstractIn situ resource utilization (ISRU) of lunar regolith is indispensable for the success of large-scale and long-term human lunar explosions at lower costs. Many new technologies must be developed to realize efficient ISRU. Because particle sorting is one of the essential processes of ISRU, a unique technology has been developed using the balance between electrodynamic and gravitational forces. First, a sorting system using an electrodynamic standing wave was developed. The particles on the parallel-line electrodes were agitated by the electrodynamic force created by the application of a standing wave, and floated small particles at a high altitude were collected in a box located above the electrodes. The experiment and numerical calculation indicated that although a high collecting position was preferable for sorting small particles, a large number of small particles hardly reached a high position and a high yield was not attained. Next, an improved sorting system that uses a traveling wave instead of a standing wave was developed to mitigate the incompatibility. When a four-phase high voltage is applied to the vertically supported parallel-line electrodes, an electrodynamic traveling wave is formed above the electrodes, forcing small regolith particles to move upward at a high position, while large particles are apt to fall. Additionally, particles were fed through a vibrating sieve to break off the aggregated particles. Finally, an averaged particle size of 12  μm and 30% in a yield of particles less than 10  μm particles was attained. The system would be suitable for space applications because it is simple, lightweight, has low power consumption, and does not require any mechanical drive or consumables.
    publisherASCE
    titleImproved Electrodynamic Particle-Size Sorting System for Lunar Regolith
    typeJournal Paper
    journal volume35
    journal issue1
    journal titleJournal of Aerospace Engineering
    identifier doi10.1061/(ASCE)AS.1943-5525.0001371
    journal fristpage04021115
    journal lastpage04021115-7
    page7
    treeJournal of Aerospace Engineering:;2021:;Volume ( 035 ):;issue: 001
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian