Journal of Aerospace Engineering: Recent submissions
Now showing items 401-420 of 2488
-
Research on an Adaptive Threshold Setting Method for Aero-Engine Fault Detection Based on KDE-EWMA
(ASCE, 2022/11/01)It is challenging to set a precise threshold in fault detection and isolation, which helps in reducing false alarms and missed detection rates. In this paper, an adaptive threshold approach is developed for aero-engine ... -
Direct Folding Method of Cylindrical Airbag and Its Application in Landing Buffer
(ASCE, 2022/11/01)The cylindrical airbag is widely used in the landing buffer field with a simple structure. It is a three-dimensional closed structure, so the folding model is difficult to establish. Because the modeling process of the ... -
Parametric Investigation of the Flight Performance of a Variable Rotor Pitch X-Configuration Quadrotor Aircraft
(ASCE, 2022/11/01)To better understand and predict the flight performance of X-configuration quadrotor aircraft using variable rotor pitch and fixed rotor speed to control the aircraft, a flight performance tool including a rotor model, an ... -
Parametric Study of Truncated Square Pyramid Folded Structure for Effective Energy Absorption under Static and Dynamic Crushing
(ASCE, 2022/11/01)The truncated square pyramid (TSP) folded structure was proposed recently, and its advantages such as easy fabrication, superior energy-absorption capacity, and better impact performance than many other types of core ... -
Attitude Stability Analysis and Configuration Design of Pyramid Drag Sail for Deorbit Missions
(ASCE, 2022/11/01)Deorbit disposal of constellation satellites at the end of their operational lifetime is considered a necessary task to maintain the safety and sustainability of low Earth orbit (LEO). In LEO region, especially below ... -
Command Governor for Constrained Attitude Angle Protection of the
(ASCE, 2022/11/01)The high-speed, low-altitude region in the flight envelope of a wing-in-ground -
Crashworthiness Enhancement of Aluminum Alloy Used for Leading Edges of Wing and Empennage Structures
(ASCE, 2022/11/01)The 2xxx series aluminum alloys are preferred as a material for aircraft leading edges because they have high failure strain compared with other aluminum alloys. This parametric study on 2xxx series aluminum alloy material ... -
Modified Empirical Model of Surface Dielectric Barrier Discharge Plasma Actuator in Flow Control
(ASCE, 2022/11/01)In this paper, an empirical model of surface dielectric barrier discharge (SDBD) plasma actuator with good prediction performance is proposed based on experimental data. Due to the complex electric field and unstable ... -
A Model-Based Framework for Dynamic Antiwindup Strategy for Gas Turbine Engine Fuel Control System
(ASCE, 2022/09/01)Fuel control is usually required to work with the acceleration and deceleration schedules to provide limit protection. However, limit protection will deteriorate controller performance. In this work, we investigate a ... -
Multiobjective Optimization Design of TomoSAR Satellite Orbit Based on Multireference Transfer Orbit
(ASCE, 2022/07/13)This paper investigates an optimal orbit design method for single-satellite synthetic aperture radar tomography (TomoSAR) missions. Satellites require multibaseline observations for three-dimensional imaging. Thus, we need ... -
Impact Behaviors of Sandwich Composites Produced by Liquid Resin Infusion: Influences of the Process Parameters
(ASCE, 2022/07/08)This article presents the results of research on sandwich materials manufactured by liquid resin infusion and designed to resist in low-velocity/low-energy impact applications. The sandwich plates are made of composites ... -
Low-Speed Oblique Impact Response of Adhesively Bonded Dissimilar Single-Lap Joints
(ASCE, 2022/07/07)Adhesively bonded joints are widely preferred for joining similar and dissimilar materials due to the mechanical advantages they provide. As the demand for the adhesively bonded method increases, it is necessary to determine ... -
Fatigue Damage–Based Topology Optimization of Helicopter Tail Rotor Pitch Arm
(ASCE, 2022/07/06)Topology optimization studies have found widespread use with advances in additive manufacturing technologies. A topology optimization method is proposed for the design of a fatigue critical part, namely, a pitch arm made ... -
Experimental Study on the Dynamic Characteristics and Surface Arc Plasma Control of Shock Train in the Supersonic Inlet
(ASCE, 2022/07/08)The oscillation characteristics and morphological changes of the shock train in the inlet expansion section and the control of the shock train by surface arc plasma were studied in Mach 2 supersonic flow. A wedge installed ... -
Numerical Investigation of Diffusers in Arc-Heated Wind Tunnel: Introducing a Novel and Efficient Hypersonic Diffuser
(ASCE, 2022/06/30)To develop an efficient hypersonic diffuser, a numerical investigation was performed on a center-body diffuser and a second-throat cylindrical diffuser of a large-scale arc-heated wind tunnel with a Mach number 6 nozzle. ... -
Numerical Investigation on Flow Control of a Hypersonic Airfoil by Plasma Synthetic Jet
(ASCE, 2022/06/30)Plasma synthetic jets (PSJs) have received widespread attention because of their rapid response capability. The use of PSJ shock and thermal effects for active flow control has been investigated in many recent studies. ... -
Research on Asteroid Landing with a New Flexible Spacecraft
(ASCE, 2022/06/11)During soft landing on asteroids, the weak gravity and rugged terrain put the spacecraft at risk of crashing and bouncing, such that a safe and accurate landing is essential for the spacecraft. In this paper, a new flexible ... -
Lambert’s Problem with Multiple Constraints
(ASCE, 2022/06/09)This paper proposes a new method to solve Lambert’s problem with multiple constraints, including the impulse-magnitude constraints, the trajectory-radius constraints, and the terminal-impact-angle constraint. First, the ... -
Experimental Investigation of Flow Control on a High-Lift Wing Using Modulated Pulse Jet Vortex Generator
(ASCE, 2022/07/13)In this paper, the potential of a novel active flow control strategy by means of a modulated pulse jet vortex generator to enhance high-lift performance is demonstrated on a two-dimensional supercritical National Aeronautics ... -
Suppression of Low-Reynolds-Number Flow Separation by Controlling the Laminar Separation Bubble with Intermittent Disturbance
(ASCE, 2022/07/01)The formation of a laminar separation bubble (LSB) at low Reynolds numbers has a significant impact on the aerodynamic performance of an airfoil. An experimental study was conducted to investigate the feasibility of using ...