Journal of Aerospace Engineering: Recent submissions
Now showing items 1061-1080 of 2488
-
Aerodynamic Optimization of a Morphing Leading Edge Airfoil with a Constant Arc Length Parameterization
(American Society of Civil Engineers, 2018)The paper presents the aerodynamic optimization of a morphing leading edge airfoil using a parameterization based on the class/shape transformation (CST) technique associated with a dedicated procedure to keep the arc ... -
Adaptive Finite-Time Control for Attitude Tracking of Spacecraft under Input Saturation
(American Society of Civil Engineers, 2018)This paper investigates two robust finite-time controllers for the attitude control of the spacecraft by using a modified terminal sliding mode surface. With the use of terminal sliding mode control and adaptive control, ... -
Conceptual Design of Stratospheric Airships Focusing on Energy Balance
(American Society of Civil Engineers, 2018)Stratospheric airships can perform long-duration, wide-area observation missions above a specific location. The conceptual design of streamlined stratospheric airships is researched in this paper. Multidisciplinary analysis ... -
Active Vibration Control of Flexible Satellites Using Solid Propellant Microthruster Array
(American Society of Civil Engineers, 2018)The paper studies a method which uses a solid propellant microthruster array (SPMA) as an actuator to control vibration of solar panels and the attitude of a satellite simultaneously. To solve the controller design problems ... -
Flow Characteristics of an Ultracompact Serpentine Inlet with an Internal Bump
(American Society of Civil Engineers, 2018)An ultracompact serpentine inlet, which contains a compact diffuser as short as 2.3 times the exit diameter, is experimentally and numerically studied. An internal bump is introduced to redistribute the boundary layer flows ... -
Trajectory Tracking Control of Autonomous Quadrotor Helicopter Using Robust Neural Adaptive Backstepping Approach
(American Society of Civil Engineers, 2018)This paper presents the design and analysis of a robust neural adaptive backstepping control (RNABC) for an autonomous quadrotor helicopter perturbed by time-varying external disturbances. The work uses a backstepping ... -
Development and Geotechnical Engineering Properties of KLS-1 Lunar Simulant
(American Society of Civil Engineers, 2018)Lunar exploration, which slowed in the 21st century after the Apollo program, has seen more activity recently with the participation of Asian countries such as Japan, China, and India. Because lunar modules and rovers ... -
Damage Monitoring and Life Prediction of Cross-Ply SiC/CAS Ceramic-Matrix Composites at Room and Elevated Temperatures under Cyclic Loading
(American Society of Civil Engineers, 2018)In this paper, damage monitoring and fatigue-life prediction of cross-ply silicon carbide fiber–reinforced calcium aluminosilicate (SiC/CAS) ceramic-matrix composites (CMCs) at room temperature and elevated temperatures ... -
Magnetic Sampler for Regolith Particles on Asteroids
(American Society of Civil Engineers, 2018)A magnetic sampler for future sample return missions on asteroids was developed. The sampler had a simple configuration, consisting of a solenoid coil, direct current (DC) power supply, and switching circuit, and the ... -
Finite-Time Adaptive Fault-Tolerant Control for Airfoil Flutter of Reentry Vehicle
(American Society of Civil Engineers, 2018)This paper presents a finite-time adaptive fault-tolerant H∞ control method for a two-dimensional airfoil flutter with parameter uncertainties and external disturbances. Sensor and actuator faults are both considered. ... -
Experimental Investigation of Aerodynamic Performance of a Turbine Cascade with Trailing-Edge Injection
(American Society of Civil Engineers, 2017)Trailing-edge mixing flows associated with coolant injection are complex and result in significant aerodynamics losses. A series of tests on a high-pressure turbine vane cascade with trailing-edge injection were conducted ... -
Design and Simulation of Active External Trailing-Edge Flaps for Wind Turbine Blades on Load Reduction
(American Society of Civil Engineers, 2017)A smart material–based active external trailing-edge flap was designed for wind turbine blades in this study. Its vibration-fatigue load reduction potential was evaluated during normal operation. The blade–external flap ... -
Analysis of an Additive Manufacturing Process for an Unmanned Aerial Vehicle
(American Society of Civil Engineers, 2017)In this article, an analysis of a manufacturing process for small aerodynamic elements is presented. Two manufacturing methods—selective laser sintering (SLS) and fused deposition modeling (FDM)—were investigated. For both, ... -
New Sliding Mode Attitude Controller Design Based on Lumped Disturbance Bound Equation
(American Society of Civil Engineers, 2018)In this paper, first the mathematical models of four major environmental disturbance torque components and corresponding bound equations are presented. Then the effect of the inertia matrix uncertainty on rigid satellite’s ... -
Dynamic Anchoring in Soft Regolith: Testing and Prediction
(American Society of Civil Engineers, 2018)In recent decades, the exploration of celestial bodies has moved to surface-based landers and rovers designed to perform experiments on the ground. The presented research focuses on legged rovers designed to climb steep ... -
Platform for Transport Aircraft Wing–Body Parametric Modeling and High-Lift System Design
(American Society of Civil Engineers, 2017)In this paper, the authors describe a software they have developed for wing–body parametric modeling and high-lift system design. This software has the following features: (1) it generates and modifies geometric as ... -
Assessment and Accuracy of New Nonpolynomial Shear Deformation Theories for Static Analysis of Laminated and Braided Composite Plates
(American Society of Civil Engineers, 2017)In the present study, two new shear deformation theories, trigonometric deformation theory (TDT) and trigonometric-hyperbolic deformation theory (THDT), are proposed. These theories are examined in detail for their ... -
Efficient Gridless Method Using Constrained Weights Optimization for Two-Dimensional Unsteady Inviscid Flows at Low Angles of Attack
(American Society of Civil Engineers, 2017)An accurate and efficient gridless method is presented for calculation of unsteady flows at low and high reduced frequencies. A central gridless scheme is applied to solve unsteady flow equations in the arbitrary ... -
Solutions of Euler’s Dynamic Equations for the Motion of a Rigid Body
(American Society of Civil Engineers, 2017)The aim of this work is to investigate the analytical solutions for the equations of motion of a rigid body about a fixed point through the process of decoupling Euler’s dynamic equations. This body is acted upon by a ... -
Influence of Mineral Composition on Sintering Lunar Regolith
(American Society of Civil Engineers, 2017)The authors investigate mechanical properties of sintered lunar regolith. Using JSC-1A and DNA lunar simulants, they study the influence of changes in glass content, main plagioclase series, and ilmenite content on a defined ...