Journal of Aerospace Engineering: Recent submissions
Now showing items 1081-1100 of 2488
-
Special Issue on Health Monitoring Technologies for Civil Infrastructure
(American Society of Civil Engineers, 2017) -
An Onboard Aeroengine Model-Tuning System
(American Society of Civil Engineers, 2017)This study investigates an onboard aeroengine model (OBEM)-tuning system (OTS) based on a hybrid Kalman filter, which is mostly used to estimate the aeroengine performance. The OTS structure comprises two parts. One is an ... -
Startup Analysis Simulator for a Small Staged Combustion–Cycle Engine Powerpack
(American Society of Civil Engineers, 2017)In general, staged combustion-cycle engines have higher propulsion efficiency than that of open-cycle engines, prompting further research to develop the next generation of the former type of engines. Especially when it is ... -
Control Strategy for a Quadrotor Helicopter with State Delay via Improved Guaranteed Cost Control and Quantum Adaptive Control
(American Society of Civil Engineers, 2017)Improved guaranteed cost control and quantum adaptive control are developed in this study for a quadrotor helicopter with state delay and actuator faults. Improved guaranteed cost control is designed to eliminate disturbance ... -
Effects of Temperature and Oxidation on Cyclic-Fatigue Life of 2D Woven Ceramic-Matrix Composites
(American Society of Civil Engineers, 2017)In this paper, the effects of temperature and oxidation on cyclic-fatigue life of two dimensional (2D) woven SiC/SiC ceramic-matrix composites (CMCs) have been investigated. The relationships between fatigue life, fibers ... -
Numerical Investigation of Sweep Angle Effect on the Supersonic Flows through Corners
(American Society of Civil Engineers, 2017)This research intends to characterize numerically the impact of sweep angle on the supersonic sharp corner flows. For this purpose, the effect of sweep angle on the variations of flow parameters such as shear stress, ... -
Improved LQG Method for Active Gust Load Alleviation
(American Society of Civil Engineers, 2017)Against a background of various techniques for gust load alleviation (GLA), this paper aims at proposing an improved linear quadratic Gaussian (LQG) method, which is robust to variations of flight parameters, structural ... -
Research on Cracking of Reinforced Concrete Beam and Its Influence on Natural Frequency by Expanded Distinct Element Method
(American Society of Civil Engineers, 2017)A distinct element model was proposed to simulate cracking in a reinforced concrete beam, and the influence of cracking on natural frequency was analyzed. Hexagonal block and tensile-shear failure criteria were implanted ... -
Twist Suppression Method of Tethered Towing for Spinning Space Debris
(American Society of Civil Engineers, 2017)Towing spinning debris in space is subjected to the risk of twist, increasing the likelihood of collision. To reduce the twist potential, a twist suppression method is proposed for the viscoelastic tether in this paper. ... -
Extended Nonlinear Force Density Method for Form-Finding of Cable-Membrane Structures
(American Society of Civil Engineers, 2017)In this paper, an alternative approach was developed for the form-finding of cable-membrane structures. The prestress of a triangular finite element was firstly equivalent to the axial force densities and uniform vertical ... -
Structural-Performance Tracking to Multitype Members of Shenzhen Vanke Center in Construction Phase
(American Society of Civil Engineers, 2017)The Shenzhen Vanke Center is constructed of a composite frame and cable system, which is a novel structural system and leads to a tedious, complex, and lengthy construction process. The structural construction process ... -
Electrostatic Sampler for Large Regolith Particles on Asteroids
(American Society of Civil Engineers, 2017)The authors have developed an electrostatic sampler for the reliable and autonomous collection of regolith particles on asteroids. The sampler, which employs Coulomb and dielectrophoresis forces to capture regolith particles ... -
Scale-Dependent Dynamic-Pull-In of Functionally Graded Carbon Nanotubes Reinforced Nanodevice with Piezoelectric Layer
(American Society of Civil Engineers, 2017)This paper proposes a scale-dependent model to investigate the dynamic-pull-in characteristics of a functionally graded carbon nanotubes (FGCNTs) reinforced nanodevice with a piezoelectric layer. Based on nonlocal beam ... -
Adaptive Backstepping Attitude Control with Disturbance Rejection Subject to Amplitude and Rate Saturations of the Elevator
(American Society of Civil Engineers, 2017)In this paper, an adaptive backstepping controller, which can attenuate external disturbance, is proposed for flight vehicle attitude control subject to amplitude and rate saturations of the elevator. First, the elevator ... -
Adaptive Backstepping Impact Angle Guidance Law Accounting for Autopilot Lag
(American Society of Civil Engineers, 2017)This paper presents a robust impact angle guidance law for maneuvering target interception with autopilot dynamics compensation based on a systematic backstepping control technique. Since the future course of action of the ... -
Planar Nozzles for Controllable Microthrusters
(American Society of Civil Engineers, 2017)Orbital maneuvering of microsatellite and nanosatellite requirements can be efficiently addressed by planar nozzles, in which real-time thrust control is gained actuating on the nozzle throat area. In the present work, the ... -
Online Trajectory Generation with Rendezvous for UAVs Using Multistage Path Prediction
(American Society of Civil Engineers, 2017)To improve the overall performance of mission planning for the unmanned aerial vehicles (UAVs), a multistage path prediction (MPP) for trajectory generation with rendezvous is addressed in this paper. The proposed real-time ... -
Optimal Guidance Law Based on Virtual Sliding Target
(American Society of Civil Engineers, 2017)In this paper, a new guidance law, which is called virtual sliding target (VST) guidance law, is designed based on the concept of the virtual target (VT). The presented law is applicable for short- and medium-range missiles. ... -
Design Optimization Method for Additive Manufacturing of the Primary Mirror of a Large-Aperture Space Telescope
(American Society of Civil Engineers, 2017)The lightweight design of the sandwich mirror, as a commonly used space primary mirror structure, is one of the key topics for the design of space-based optomechanical systems. Owing to the limitation of traditional ... -
Dimensionally and Physically Proper Lift, Drag, and Thrust-Related Numbers as Figures of Merit: Normalized Lift, Drag, and Thrust, ηL, ηD, and ηT
(American Society of Civil Engineers, 2017)Textbooks state that the lift, drag, and thrust coefficients CL, CD, and CT, are numbers that must be dimensionally proper (i.e., dimensionless) for their use in comparing different data sets. This paper posits that ...