Now showing items 1041-1060 of 1131

    • Chilled Water Thermal Energy Storage without Electric Rate Incentives or Rebates 

      J. S. Caldwell; W. P. Bahnfleth (American Society of Civil Engineers, 1997)
      Stratified chilled water thermal energy storage (TES) is an accepted load shifting technology for chilled water plants serving large cooling loads. Much of the success experienced by TES technology in the past can be ...
    • Low Velocity Impact Resistance of Laminated Architectural Glass 

      F. W. Flocker; L. R. Dharani (American Society of Civil Engineers, 1998)
      Recently developed finite element algorithms are used to study the effect of glass ply geometry on low velocity, small missile impact resistance of laminated architectural glass. The impacts studied are those typically ...
    • BOOK REVIEWS 

      Unknown author (American Society of Civil Engineers, 1997)
    • Uplift Capacity of Light-Frame Rafter to Top Plate Connections 

      T. D. Reed; D. V. Rosowsky; S. D. Schiff (American Society of Civil Engineers, 1997)
      An experimental testing program was conducted to investigate the uplift capacity of various rafter to top plate connections. Rather than simply testing the fastener in an ideal test specimen configuration, attention is ...
    • Prospects for Cool Thermal Storage in a Competitive Electric Power Industry 

      William P. Bahnfleth; Douglas T. Reindl (American Society of Civil Engineers, 1998)
      During the 1980s and early 1990s, the use of cool thermal energy storage (TES) in commercial, institutional, and industrial facility air-conditioning systems became widespread in the United States. The growth of TES was ...
    • Innovative Wall System for Construction Industry 

      Carter T. Dedolph Jr.; Edward J. Jaselskis (American Society of Civil Engineers, 1997)
      This paper describes an innovative wall system for use in residential and commercial construction projects that is reusable, uses less dimensional lumber, and is faster to assemble and install compared to traditional stud ...
    • <b><i>PRACTITIONER'S FORUM</i></b> 

      Unknown author (American Society of Civil Engineers, 1997)
    • Facilities Computerized Maintenance Management Systems 

      John W. Korka; Amr A. Oloufa; H. Randolph Thomas (American Society of Civil Engineers, 1997)
      Maintenance has a profound impact on the efficiency and overall budget of facilities. Today many maintenance organizations are developing and using computer programs geared toward control of this maintenance program. ...
    • Effects of Luminous Environment on Worker Productivity in Building Spaces 

      Ossama A. Abdou (American Society of Civil Engineers, 1997)
      This paper is based in part, on the results of a survey undertaken by the writer for an industrial client. The purpose was to collect and systematize information on quantitative relations between the indoor environment and ...
    • Architectural Engineering Program at King Fahd University of Petroleum and Minerals 

      Abdul-Mohsen Al-Hammad; Sadi Assaf (American Society of Civil Engineers, 1997)
      The baccalaureate and master's programs in architectural engineering at King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia, are presented here. The Bachelor of Science Program in Architectural Engineering ...
    • Environmental Chamber for Investigation of Building Envelope Performance 

      Paul Fazio; Andreas K. Athienitis; Cedric Marsh; Jiwu Rao (American Society of Civil Engineers, 1997)
      This paper describes the design and development of an environmental chamber for investigation of building envelope performance as a function of heat, air, and moisture transfer, and the interaction between the building ...
    • Precast Concrete Floor Framing Systems to Accommodate Nonstructural Requirements 

      E. Sarah Slaughter; Richard S. Sause; Stephen Pessiki (American Society of Civil Engineers, 1997)
      To increase the efficiency of precast concrete buildings throughout their expected life, a set of criteria for structural floor framing systems was developed to explicitly accommodate nonstructural requirements. The ...
    • Study on Smoke Movement and Control for Fires in Apartments 

      W. K. Chow (American Society of Civil Engineers, 1997)
      The smoke aspects in the escape routes for a three-level apartment are studied using the fire zone model CFAST 2.0. The smoke temperature and smoke layer interface heights in the corridors and staircases are analyzed. ...
    • Simulation of Fire Environment for Linear Atria in Hong Kong 

      Wan K. Chow (American Society of Civil Engineers, 1997)
      More than 35% of atria in Hong Kong can be classified as linear with large transverse dimensions. The smoke filling process due to fires in these atria was studied. Both the zone model and the computational fluid dynamics ...
    • <b><i>PRACTITIONERS' FORUM</i></b> 

      Unknown author (American Society of Civil Engineers, 1997)
    • Management of Prefabrication for Complex Cladding: Case Study 

      Alistair G. F. Gibb; Richard H. Neale (American Society of Civil Engineers, 1997)
      It is not inconceivable that everything except the basic structure of an office building could be prefabricated in the near future. Quality and schedule are nearly always improved with prefabrication due to the simple ...
    • Shop Drawing Process of Stone Veneered Cladding Systems 

      Roberto Pietroforte (American Society of Civil Engineers, 1997)
      In modern construction the timely and successful completion of shop drawings is critical for project performance. By containing specific instructions about the fabrication, assembly, and erection of a building component, ...
    • PRACTITIONERS' FORUM 

      Unknown author (American Society of Civil Engineers, 1997)
    • Tool to Design for Construction Worker Safety 

      John A. Gambatese; Jimmie W. Hinze; Carl T. Haas (American Society of Civil Engineers, 1997)
      Improving construction worker safety continues to be a major goal in the construction industry. While significant improvements in safety performance have been made in the past few decades, one party within the project team, ...
    • Aesthetics and Philosophy in Bridge Design in Japan 

      Ewa M. Kido (American Society of Civil Engineers, 1997)
      This paper investigates the background of current trends in bridge design in Japan in the context of common design practice, which distinguishes architecturally, industrially, and structurally led designs. Because the ...