| contributor author | Hwang, Joo | |
| contributor author | Seo, Seung | |
| contributor author | Lee, Won | |
| date accessioned | 2017-05-09T01:27:32Z | |
| date available | 2017-05-09T01:27:32Z | |
| date issued | 2016 | |
| identifier issn | 1528-9044 | |
| identifier other | ep_138_03_031006.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/160828 | |
| description abstract | We examined the effect of the design parameters of a throughsilicon via (TSV) on the thermomechanical stress distribution at the bottom of the TSV using finite element analysis. Static analyses were carried out at 350 آ°C to simulate the maximum thermomechanical stress during postplating annealing. The thermomechanical stress is concentrated in the lower region of a TSV, and the maximum stress in silicon occurs at the bottom of the TSV. The TSV diameter and dielectric liner thickness were two important determinants of the maximum stress in the silicon. The maximum stress decreased with decreasing TSV diameter, whereas the effect of aspect ratio was negligible. A thick dielectric liner is advantageous for lowering the maximum stress in silicon. The minimum dielectric thickness resulting in a maximum stress less than the yield stress of silicon was 520, 230, and 110 nm for via diameters of 20, 10, and 5 خ¼m, respectively. The maximum stress also decreased with the thickness of the copper overburden. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Effect of Design Parameters on Thermomechanical Stress in Silicon of Through Silicon Via | |
| type | Journal Paper | |
| journal volume | 138 | |
| journal issue | 3 | |
| journal title | Journal of Electronic Packaging | |
| identifier doi | 10.1115/1.4033923 | |
| journal fristpage | 31006 | |
| journal lastpage | 31006 | |
| identifier eissn | 1043-7398 | |
| tree | Journal of Electronic Packaging:;2016:;volume( 138 ):;issue: 003 | |
| contenttype | Fulltext | |