Show simple item record

contributor authorHwang, Joo
contributor authorSeo, Seung
contributor authorLee, Won
date accessioned2017-05-09T01:27:32Z
date available2017-05-09T01:27:32Z
date issued2016
identifier issn1528-9044
identifier otherep_138_03_031006.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/160828
description abstractWe examined the effect of the design parameters of a throughsilicon via (TSV) on the thermomechanical stress distribution at the bottom of the TSV using finite element analysis. Static analyses were carried out at 350 آ°C to simulate the maximum thermomechanical stress during postplating annealing. The thermomechanical stress is concentrated in the lower region of a TSV, and the maximum stress in silicon occurs at the bottom of the TSV. The TSV diameter and dielectric liner thickness were two important determinants of the maximum stress in the silicon. The maximum stress decreased with decreasing TSV diameter, whereas the effect of aspect ratio was negligible. A thick dielectric liner is advantageous for lowering the maximum stress in silicon. The minimum dielectric thickness resulting in a maximum stress less than the yield stress of silicon was 520, 230, and 110 nm for via diameters of 20, 10, and 5 خ¼m, respectively. The maximum stress also decreased with the thickness of the copper overburden.
publisherThe American Society of Mechanical Engineers (ASME)
titleEffect of Design Parameters on Thermomechanical Stress in Silicon of Through Silicon Via
typeJournal Paper
journal volume138
journal issue3
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4033923
journal fristpage31006
journal lastpage31006
identifier eissn1043-7398
treeJournal of Electronic Packaging:;2016:;volume( 138 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record