YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Thermal Science and Engineering Applications
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Thermal Science and Engineering Applications
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Experimental Investigation of Coil Curvature Effect on Heat Transfer and Pressure Drop Characteristics of Shell and Coil Heat Exchanger

    Source: Journal of Thermal Science and Engineering Applications:;2015:;volume( 007 ):;issue: 001::page 11005
    Author:
    Salem, M. R.
    ,
    Elshazly, K. M.
    ,
    Sakr, R. Y.
    ,
    Ali, R. K.
    DOI: 10.1115/1.4028612
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: The present work experimentally investigates the characteristics of convective heat transfer in horizontal shell and coil heat exchangers in addition to friction factor for fully developed flow through the helically coiled tube (HCT). The majority of previous studies were performed on HCTs with isothermal and isoflux boundary conditions or shell and coil heat exchangers with small ranges of HCT configurations and fluid operating conditions. Here, five heat exchangers of counterflow configuration were constructed with different HCTcurvature ratios (خ´) and tested at different mass flow rates and inlet temperatures of the two sides of the heat exchangers. Totally, 295 test runs were performed from which the HCTside and shellside heat transfer coefficients were calculated. Results showed that the average Nusselt numbers of the two sides of the heat exchangers and the overall heat transfer coefficients increased by increasing coil curvature ratio. The average increase in the average Nusselt number is of 160.3–80.6% for the HCT side and of 224.3–92.6% for the shell side when خ´ increases from 0.0392 to 0.1194 within the investigated ranges of different parameters. Also, for the same flow rate in both heat exchanger sides, the effect of coil pitch and number of turns with the same coil torsion and tube length is remarkable on shell average Nusselt number while it is insignificant on HCTaverage Nusselt number. In addition, a significant increase of 33.2–7.7% is obtained in the HCTFanning friction factor (fc) when خ´ increases from 0.0392 to 0.1194. Correlations for the average Nusselt numbers for both heat exchanger sides and the HCT Fanning friction factor as a function of the investigated parameters are obtained.
    • Download: (2.787Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Experimental Investigation of Coil Curvature Effect on Heat Transfer and Pressure Drop Characteristics of Shell and Coil Heat Exchanger

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/159680
    Collections
    • Journal of Thermal Science and Engineering Applications

    Show full item record

    contributor authorSalem, M. R.
    contributor authorElshazly, K. M.
    contributor authorSakr, R. Y.
    contributor authorAli, R. K.
    date accessioned2017-05-09T01:23:42Z
    date available2017-05-09T01:23:42Z
    date issued2015
    identifier issn1948-5085
    identifier othertsea_007_01_011005.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/159680
    description abstractThe present work experimentally investigates the characteristics of convective heat transfer in horizontal shell and coil heat exchangers in addition to friction factor for fully developed flow through the helically coiled tube (HCT). The majority of previous studies were performed on HCTs with isothermal and isoflux boundary conditions or shell and coil heat exchangers with small ranges of HCT configurations and fluid operating conditions. Here, five heat exchangers of counterflow configuration were constructed with different HCTcurvature ratios (خ´) and tested at different mass flow rates and inlet temperatures of the two sides of the heat exchangers. Totally, 295 test runs were performed from which the HCTside and shellside heat transfer coefficients were calculated. Results showed that the average Nusselt numbers of the two sides of the heat exchangers and the overall heat transfer coefficients increased by increasing coil curvature ratio. The average increase in the average Nusselt number is of 160.3–80.6% for the HCT side and of 224.3–92.6% for the shell side when خ´ increases from 0.0392 to 0.1194 within the investigated ranges of different parameters. Also, for the same flow rate in both heat exchanger sides, the effect of coil pitch and number of turns with the same coil torsion and tube length is remarkable on shell average Nusselt number while it is insignificant on HCTaverage Nusselt number. In addition, a significant increase of 33.2–7.7% is obtained in the HCTFanning friction factor (fc) when خ´ increases from 0.0392 to 0.1194. Correlations for the average Nusselt numbers for both heat exchanger sides and the HCT Fanning friction factor as a function of the investigated parameters are obtained.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleExperimental Investigation of Coil Curvature Effect on Heat Transfer and Pressure Drop Characteristics of Shell and Coil Heat Exchanger
    typeJournal Paper
    journal volume7
    journal issue1
    journal titleJournal of Thermal Science and Engineering Applications
    identifier doi10.1115/1.4028612
    journal fristpage11005
    journal lastpage11005
    identifier eissn1948-5093
    treeJournal of Thermal Science and Engineering Applications:;2015:;volume( 007 ):;issue: 001
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian