Enhanced Electrical and Thermal Interconnects by the Self Assembly of Nanoparticle Necks Utilizing Capillary BridgingSource: Journal of Electronic Packaging:;2014:;volume( 136 ):;issue: 004::page 41012Author:Brunschwiler, Thomas
,
Schlottig, Gerd
,
Ni, Songbo
,
Liu, Yu
,
Goicochea, Javier V.
,
Zأ¼rcher, Jonas
,
Wolf, Heiko
DOI: 10.1115/1.4028332Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This work presents enhanced composite joints that support both electrical and thermal transport in electronic packages. The joints are sequentially formed by applying a nanoparticle suspension, evaporating a solvent, selfassembling of nanoparticles by capillary bridging, and the formation of so called “necks†between micrometersized features. This sequence is used to either form low temperature electrical joints under copper pillars or enhanced percolating thermal underfills (ePTU) with areal contacts between filler particles of the composite. The report discusses processing aspects of the capillary bridges evolution and of uniform neck formation, it discusses strategies to achieve mechanically stable necks, and it compares the performance of the achieved joints against stateoftheart solutions. The capillary bridge evolution during liquid evaporation was investigated in copper pillar arrays and random particle beds. The vapor–liquid interface first penetrates locations of low pillar or particle density resulting in a dendritic fluid network. Once the network breaks up, individual necks form. For aqueous nanosuspensions, highly uniform necks with high yield were obtained by evaporation at 60 آ°C. Isothermal conditions were preferred to yield equal neck counts at the cavity's top and bottom surfaces. Mechanically stable silver necks required an annealing at only 150 آ°C, dielectric necks an annealing at 140 آ°C with a bimodal approach. Therein polystyrene (PS) nanoparticles occupy interstitial positions in densly packed alumina necks, then melt and adhere to the alumina. The electrical necks showed a shear strength of 16 MPa, equivalent to silver joints used in power electronic packages. The thermal necks yielded a thermal conductivity of up to 3.8 W/mK, fivefold higher than commercially available capillary thermal underfills.
|
Collections
Show full item record
| contributor author | Brunschwiler, Thomas | |
| contributor author | Schlottig, Gerd | |
| contributor author | Ni, Songbo | |
| contributor author | Liu, Yu | |
| contributor author | Goicochea, Javier V. | |
| contributor author | Zأ¼rcher, Jonas | |
| contributor author | Wolf, Heiko | |
| date accessioned | 2017-05-09T01:06:55Z | |
| date available | 2017-05-09T01:06:55Z | |
| date issued | 2014 | |
| identifier issn | 1528-9044 | |
| identifier other | ep_136_04_041012.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/154506 | |
| description abstract | This work presents enhanced composite joints that support both electrical and thermal transport in electronic packages. The joints are sequentially formed by applying a nanoparticle suspension, evaporating a solvent, selfassembling of nanoparticles by capillary bridging, and the formation of so called “necks†between micrometersized features. This sequence is used to either form low temperature electrical joints under copper pillars or enhanced percolating thermal underfills (ePTU) with areal contacts between filler particles of the composite. The report discusses processing aspects of the capillary bridges evolution and of uniform neck formation, it discusses strategies to achieve mechanically stable necks, and it compares the performance of the achieved joints against stateoftheart solutions. The capillary bridge evolution during liquid evaporation was investigated in copper pillar arrays and random particle beds. The vapor–liquid interface first penetrates locations of low pillar or particle density resulting in a dendritic fluid network. Once the network breaks up, individual necks form. For aqueous nanosuspensions, highly uniform necks with high yield were obtained by evaporation at 60 آ°C. Isothermal conditions were preferred to yield equal neck counts at the cavity's top and bottom surfaces. Mechanically stable silver necks required an annealing at only 150 آ°C, dielectric necks an annealing at 140 آ°C with a bimodal approach. Therein polystyrene (PS) nanoparticles occupy interstitial positions in densly packed alumina necks, then melt and adhere to the alumina. The electrical necks showed a shear strength of 16 MPa, equivalent to silver joints used in power electronic packages. The thermal necks yielded a thermal conductivity of up to 3.8 W/mK, fivefold higher than commercially available capillary thermal underfills. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Enhanced Electrical and Thermal Interconnects by the Self Assembly of Nanoparticle Necks Utilizing Capillary Bridging | |
| type | Journal Paper | |
| journal volume | 136 | |
| journal issue | 4 | |
| journal title | Journal of Electronic Packaging | |
| identifier doi | 10.1115/1.4028332 | |
| journal fristpage | 41012 | |
| journal lastpage | 41012 | |
| identifier eissn | 1043-7398 | |
| tree | Journal of Electronic Packaging:;2014:;volume( 136 ):;issue: 004 | |
| contenttype | Fulltext |