| contributor author | Thomas, Dhanesh | |
| contributor author | Sebastian, Mailadil T. | |
| date accessioned | 2017-05-09T01:06:49Z | |
| date available | 2017-05-09T01:06:49Z | |
| date issued | 2014 | |
| identifier issn | 1528-9044 | |
| identifier other | ep_136_03_031002.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/154473 | |
| description abstract | Polymer–ceramic composites have been prepared by dispersing Ca4La6(SiO4)4(PO4)2O2 (CLSP) ceramic filler in high density polyethylene (HDPE) matrix through melt mixing. Scanning electron micrographs reveal the extent of filler dispersion. The dielectric properties at 1 MHz and 5 GHz have been investigated as a function of filler content. The relative permittivity increases with filler loading, maintaining a low dielectric loss. The composite with highest filler loading of 0.4 volume fraction shows a relative permittivity of 5.1 and dielectric loss of 2.3 أ— 10−3 at 5 GHz. Experimentally observed values of relative permittivity at 5 GHz have been compared with the values calculated using various theoretical models. Both the coefficient of linear thermal expansion and tensile strength have been observed to decrease with filler loading, reaching a minimum value of 117 ppm/ آ°C and 20.7 MPa, respectively, at 0.4 volume fraction of filler. The composite with maximum filler loading of 0.4 volume fraction shows the highest thermal conductivity (TC) and is 1.2 W m−1 K−1. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | HDPE Matrix Composites Filled With Ca4La6(SiO4)4(PO4)2O2 for Microwave Substrate Applications | |
| type | Journal Paper | |
| journal volume | 136 | |
| journal issue | 3 | |
| journal title | Journal of Electronic Packaging | |
| identifier doi | 10.1115/1.4027089 | |
| journal fristpage | 31002 | |
| journal lastpage | 31002 | |
| identifier eissn | 1043-7398 | |
| tree | Journal of Electronic Packaging:;2014:;volume( 136 ):;issue: 003 | |
| contenttype | Fulltext | |