Show simple item record

contributor authorThomas, Dhanesh
contributor authorSebastian, Mailadil T.
date accessioned2017-05-09T01:06:49Z
date available2017-05-09T01:06:49Z
date issued2014
identifier issn1528-9044
identifier otherep_136_03_031002.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/154473
description abstractPolymer–ceramic composites have been prepared by dispersing Ca4La6(SiO4)4(PO4)2O2 (CLSP) ceramic filler in high density polyethylene (HDPE) matrix through melt mixing. Scanning electron micrographs reveal the extent of filler dispersion. The dielectric properties at 1 MHz and 5 GHz have been investigated as a function of filler content. The relative permittivity increases with filler loading, maintaining a low dielectric loss. The composite with highest filler loading of 0.4 volume fraction shows a relative permittivity of 5.1 and dielectric loss of 2.3 أ— 10−3 at 5 GHz. Experimentally observed values of relative permittivity at 5 GHz have been compared with the values calculated using various theoretical models. Both the coefficient of linear thermal expansion and tensile strength have been observed to decrease with filler loading, reaching a minimum value of 117 ppm/ آ°C and 20.7 MPa, respectively, at 0.4 volume fraction of filler. The composite with maximum filler loading of 0.4 volume fraction shows the highest thermal conductivity (TC) and is 1.2 W m−1 K−1.
publisherThe American Society of Mechanical Engineers (ASME)
titleHDPE Matrix Composites Filled With Ca4La6(SiO4)4(PO4)2O2 for Microwave Substrate Applications
typeJournal Paper
journal volume136
journal issue3
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4027089
journal fristpage31002
journal lastpage31002
identifier eissn1043-7398
treeJournal of Electronic Packaging:;2014:;volume( 136 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record