| contributor author | Mandegari, Mohsen Ali | |
| contributor author | Pahlavanzadeh, Hassan | |
| date accessioned | 2017-05-09T01:02:53Z | |
| date available | 2017-05-09T01:02:53Z | |
| date issued | 2013 | |
| identifier issn | 1948-5085 | |
| identifier other | tsea_005_04_041002.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/153252 | |
| description abstract | In this work an air dehumidification desiccant system is investigated. A twodimensional unsteady state numerical model is developed for the simulation of the heat and mass transfer phenomena in a representative channel of a desiccant wheel. A set of operating cases with known experimental results are simulated with the numerical model. An acceptable agreement between the results experimentally and numerically predicted is found. Parametric studies are conducted regarding the influence of operating parameters on the performance of the desiccant wheel. The air dehumidification desiccant system is simulated in order to predict the electrical energy required for fan operation and to drive the wheel, as well as the thermal energy for the heating of the regeneration airflow. Several parametric studies are performed toward the characterization of optimum performance of the overall system considering two criteria as: (i) the minimization of the humidity ratio of the supply process air and (ii) minimization of the specific adsorption energy. The optimum point of case one is at the lowest wheel speed (4 Rph) and middle regeneration temperature (97 آ°C) whereas for case two, the optimum point happens at the highest regeneration temperature, regeneration flow rate desiccant wheel speed, and moderate process volume airflow (0.65 m/s). | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | A Study on the Optimization of an Air Dehumidification Desiccant System | |
| type | Journal Paper | |
| journal volume | 5 | |
| journal issue | 4 | |
| journal title | Journal of Thermal Science and Engineering Applications | |
| identifier doi | 10.1115/1.4023972 | |
| journal fristpage | 41002 | |
| journal lastpage | 41002 | |
| identifier eissn | 1948-5093 | |
| tree | Journal of Thermal Science and Engineering Applications:;2013:;volume( 005 ):;issue: 004 | |
| contenttype | Fulltext | |