Show simple item record

contributor authorMandegari, Mohsen Ali
contributor authorPahlavanzadeh, Hassan
date accessioned2017-05-09T01:02:53Z
date available2017-05-09T01:02:53Z
date issued2013
identifier issn1948-5085
identifier othertsea_005_04_041002.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/153252
description abstractIn this work an air dehumidification desiccant system is investigated. A twodimensional unsteady state numerical model is developed for the simulation of the heat and mass transfer phenomena in a representative channel of a desiccant wheel. A set of operating cases with known experimental results are simulated with the numerical model. An acceptable agreement between the results experimentally and numerically predicted is found. Parametric studies are conducted regarding the influence of operating parameters on the performance of the desiccant wheel. The air dehumidification desiccant system is simulated in order to predict the electrical energy required for fan operation and to drive the wheel, as well as the thermal energy for the heating of the regeneration airflow. Several parametric studies are performed toward the characterization of optimum performance of the overall system considering two criteria as: (i) the minimization of the humidity ratio of the supply process air and (ii) minimization of the specific adsorption energy. The optimum point of case one is at the lowest wheel speed (4 Rph) and middle regeneration temperature (97 آ°C) whereas for case two, the optimum point happens at the highest regeneration temperature, regeneration flow rate desiccant wheel speed, and moderate process volume airflow (0.65 m/s).
publisherThe American Society of Mechanical Engineers (ASME)
titleA Study on the Optimization of an Air Dehumidification Desiccant System
typeJournal Paper
journal volume5
journal issue4
journal titleJournal of Thermal Science and Engineering Applications
identifier doi10.1115/1.4023972
journal fristpage41002
journal lastpage41002
identifier eissn1948-5093
treeJournal of Thermal Science and Engineering Applications:;2013:;volume( 005 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record