| contributor author | Jinfu Ma | |
| contributor author | Yongning Liu | |
| date accessioned | 2017-05-09T00:51:46Z | |
| date available | 2017-05-09T00:51:46Z | |
| date copyright | February, 2012 | |
| date issued | 2012 | |
| identifier issn | 2381-6872 | |
| identifier other | JFCSAU-28952#011004_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/149269 | |
| description abstract | The use of noble catalysts and ion exchange membranes make the design of a direct borohydride fuel cell (DBFC) stack complicate and limit its application. Therefore, the development of simple, cost effective construction for DBFC stacks is necessary. In this paper, a passive DBFC stack that consists of four unit cells was designed, fabricated, and tested. The stack eliminated the need for a polyelectrolyte membrane because of the use of a metal phthalocyanine catalyst for oxygen reduction reaction (ORR), which has a high borohydride tolerance. The electrochemical experiments show that the stack can obtain open-circuit-voltage (OCV) of 3.6 V and the maximal power of 400 mW at 1.5 V at ambient temperature. In addition, the DBFC stack was successfully applied to power a radio, which can continuously run for about 3 h on refueling 8 mL 1 M borohydride solution. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Design of a Membraneless Passive Planar Four-Cell Direct Borohydride Fuel Cell | |
| type | Journal Paper | |
| journal volume | 9 | |
| journal issue | 1 | |
| journal title | Journal of Fuel Cell Science and Technology | |
| identifier doi | 10.1115/1.4005383 | |
| journal fristpage | 11004 | |
| identifier eissn | 2381-6910 | |
| keywords | Electric potential | |
| keywords | Design | |
| keywords | Fuel cells | |
| keywords | Membranes | |
| keywords | Temperature | |
| keywords | Catalysts AND Circuits | |
| tree | Journal of Fuel Cell Science and Technology:;2012:;volume( 009 ):;issue: 001 | |
| contenttype | Fulltext | |