Show simple item record

contributor authorJinfu Ma
contributor authorYongning Liu
date accessioned2017-05-09T00:51:46Z
date available2017-05-09T00:51:46Z
date copyrightFebruary, 2012
date issued2012
identifier issn2381-6872
identifier otherJFCSAU-28952#011004_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/149269
description abstractThe use of noble catalysts and ion exchange membranes make the design of a direct borohydride fuel cell (DBFC) stack complicate and limit its application. Therefore, the development of simple, cost effective construction for DBFC stacks is necessary. In this paper, a passive DBFC stack that consists of four unit cells was designed, fabricated, and tested. The stack eliminated the need for a polyelectrolyte membrane because of the use of a metal phthalocyanine catalyst for oxygen reduction reaction (ORR), which has a high borohydride tolerance. The electrochemical experiments show that the stack can obtain open-circuit-voltage (OCV) of 3.6 V and the maximal power of 400 mW at 1.5 V at ambient temperature. In addition, the DBFC stack was successfully applied to power a radio, which can continuously run for about 3 h on refueling 8 mL 1 M borohydride solution.
publisherThe American Society of Mechanical Engineers (ASME)
titleDesign of a Membraneless Passive Planar Four-Cell Direct Borohydride Fuel Cell
typeJournal Paper
journal volume9
journal issue1
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.4005383
journal fristpage11004
identifier eissn2381-6910
keywordsElectric potential
keywordsDesign
keywordsFuel cells
keywordsMembranes
keywordsTemperature
keywordsCatalysts AND Circuits
treeJournal of Fuel Cell Science and Technology:;2012:;volume( 009 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record