Stack Operation Using Composite Membrane-Electrodes Assemblies at 120Â °CSource: Journal of Fuel Cell Science and Technology:;2012:;volume( 009 ):;issue: 003::page 31005DOI: 10.1115/1.4005811Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A 500 W stack operating at medium temperatures was designed, manufactured and tested. Nanocomposite Nafion membranes/electrodes (MEA1-NZr) assemblies, containing a commercial yttria stabilized zirconia (YSZ) as a filler, were developed to work over 80Â °C. A 100 cm2 cell active area with a parallel serpentine flow field as reactants distributor was used for stack realization. Preliminary electrochemical tests in a single cell and in two-cells short stack were performed at 120Â °C, 3 barabs and fully hydrated gases, reaching a rated power at 50 A of about 30W in single cell and 70W in short stack. Finally, a 20 cells stack was assembled, with composite MEA-NZr, and tested at 120Â °C, 3 barabs and partially humidified gases. In these conditions, a power of 433 W at 50 A was reached. Comparing these results with the short stack performance at the same current (50 A), a 24% of power loss, which corresponds to 7 W/cell, was recorded. This performance reduction could be explained considering the scale up effect passing from 2-cells to 20-cells stack. The obtained results show that the developed composite membrane-electrodes assemblies and the designed stack are suitable for working at higher temperature than traditional polymer electrolyte membrane fuel cells.
keyword(s): Composite materials , Manufacturing , Electrodes , Flow (Dynamics) , Temperature , Membranes , Proton exchange membrane fuel cells , Gases AND Stack design ,
|
Collections
Show full item record
| contributor author | G. Giacoppo | |
| contributor author | A. Carbone | |
| contributor author | I. Gatto | |
| contributor author | A. Saccà | |
| contributor author | R. Pedicini | |
| contributor author | O. Barbera | |
| contributor author | E. Passalacqua | |
| date accessioned | 2017-05-09T00:51:38Z | |
| date available | 2017-05-09T00:51:38Z | |
| date copyright | June, 2012 | |
| date issued | 2012 | |
| identifier issn | 2381-6872 | |
| identifier other | JFCSAU-28954#031005_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/149232 | |
| description abstract | A 500 W stack operating at medium temperatures was designed, manufactured and tested. Nanocomposite Nafion membranes/electrodes (MEA1-NZr) assemblies, containing a commercial yttria stabilized zirconia (YSZ) as a filler, were developed to work over 80Â °C. A 100 cm2 cell active area with a parallel serpentine flow field as reactants distributor was used for stack realization. Preliminary electrochemical tests in a single cell and in two-cells short stack were performed at 120Â °C, 3 barabs and fully hydrated gases, reaching a rated power at 50 A of about 30W in single cell and 70W in short stack. Finally, a 20 cells stack was assembled, with composite MEA-NZr, and tested at 120Â °C, 3 barabs and partially humidified gases. In these conditions, a power of 433 W at 50 A was reached. Comparing these results with the short stack performance at the same current (50 A), a 24% of power loss, which corresponds to 7 W/cell, was recorded. This performance reduction could be explained considering the scale up effect passing from 2-cells to 20-cells stack. The obtained results show that the developed composite membrane-electrodes assemblies and the designed stack are suitable for working at higher temperature than traditional polymer electrolyte membrane fuel cells. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Stack Operation Using Composite Membrane-Electrodes Assemblies at 120Â °C | |
| type | Journal Paper | |
| journal volume | 9 | |
| journal issue | 3 | |
| journal title | Journal of Fuel Cell Science and Technology | |
| identifier doi | 10.1115/1.4005811 | |
| journal fristpage | 31005 | |
| identifier eissn | 2381-6910 | |
| keywords | Composite materials | |
| keywords | Manufacturing | |
| keywords | Electrodes | |
| keywords | Flow (Dynamics) | |
| keywords | Temperature | |
| keywords | Membranes | |
| keywords | Proton exchange membrane fuel cells | |
| keywords | Gases AND Stack design | |
| tree | Journal of Fuel Cell Science and Technology:;2012:;volume( 009 ):;issue: 003 | |
| contenttype | Fulltext |