Show simple item record

contributor authorG. Giacoppo
contributor authorA. Carbone
contributor authorI. Gatto
contributor authorA. Saccà
contributor authorR. Pedicini
contributor authorO. Barbera
contributor authorE. Passalacqua
date accessioned2017-05-09T00:51:38Z
date available2017-05-09T00:51:38Z
date copyrightJune, 2012
date issued2012
identifier issn2381-6872
identifier otherJFCSAU-28954#031005_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/149232
description abstractA 500 W stack operating at medium temperatures was designed, manufactured and tested. Nanocomposite Nafion membranes/electrodes (MEA1-NZr) assemblies, containing a commercial yttria stabilized zirconia (YSZ) as a filler, were developed to work over 80Â °C. A 100 cm2 cell active area with a parallel serpentine flow field as reactants distributor was used for stack realization. Preliminary electrochemical tests in a single cell and in two-cells short stack were performed at 120Â °C, 3 barabs and fully hydrated gases, reaching a rated power at 50 A of about 30W in single cell and 70W in short stack. Finally, a 20 cells stack was assembled, with composite MEA-NZr, and tested at 120Â °C, 3 barabs and partially humidified gases. In these conditions, a power of 433 W at 50 A was reached. Comparing these results with the short stack performance at the same current (50 A), a 24% of power loss, which corresponds to 7 W/cell, was recorded. This performance reduction could be explained considering the scale up effect passing from 2-cells to 20-cells stack. The obtained results show that the developed composite membrane-electrodes assemblies and the designed stack are suitable for working at higher temperature than traditional polymer electrolyte membrane fuel cells.
publisherThe American Society of Mechanical Engineers (ASME)
titleStack Operation Using Composite Membrane-Electrodes Assemblies at 120 °C
typeJournal Paper
journal volume9
journal issue3
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.4005811
journal fristpage31005
identifier eissn2381-6910
keywordsComposite materials
keywordsManufacturing
keywordsElectrodes
keywordsFlow (Dynamics)
keywordsTemperature
keywordsMembranes
keywordsProton exchange membrane fuel cells
keywordsGases AND Stack design
treeJournal of Fuel Cell Science and Technology:;2012:;volume( 009 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record