YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Electronic Packaging
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Electronic Packaging
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Failure Analysis of Halogen-Free Printed Circuit Board Assembly Under Board-Level Drop Test

    Source: Journal of Electronic Packaging:;2012:;volume( 134 ):;issue: 001::page 11011
    Author:
    Hung-Jen Chang
    ,
    Chau-Jie Zhan
    ,
    Jung-Hua Chou
    ,
    Tao-Chih Chang
    DOI: 10.1115/1.4005956
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: In this study, a lead-free dummy plastic ball grid array component with daisy-chains and Sn4.0 Ag0.5 Cu Pb-free solder balls was assembled on an halogen-free high density interconnection printed circuit board (PCB) by using Sn1.0 Ag0.5 Cu solder paste on the Cu pad surfaces of either organic solderable preservative (OSP) or electroless nickel immersion gold (ENIG). The assembly was tested for the effect of the formation extent of Ag3 Sn intermetallic compound. Afterward a board-level pulse-controlled drop test was conducted on the as-reflowed assemblies according to the JESD22-B110 and JESD22-B111 standards, the impact performance of various surface finished halogen-free printed circuit board assembly was evaluated. The test results showed that most of the fractures occurred around the pad on the test board first. Then cracks propagated across the outer build-up layer. Finally, the inner copper trace was fractured due to the propagated cracks, resulting in the failure of the PCB side. Interfacial stresses numerically obtained by the transient stress responses supported the test observation as the simulated initial crack position was the same as that observed.
    keyword(s): Solders , Drops , Failure , Printed circuit board assemblies , Solder joints , Stress , Intermetallic compounds AND Fracture (Process) ,
    • Download: (3.118Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Failure Analysis of Halogen-Free Printed Circuit Board Assembly Under Board-Level Drop Test

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/148614
    Collections
    • Journal of Electronic Packaging

    Show full item record

    contributor authorHung-Jen Chang
    contributor authorChau-Jie Zhan
    contributor authorJung-Hua Chou
    contributor authorTao-Chih Chang
    date accessioned2017-05-09T00:49:34Z
    date available2017-05-09T00:49:34Z
    date copyrightMarch, 2012
    date issued2012
    identifier issn1528-9044
    identifier otherJEPAE4-26323#011011_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/148614
    description abstractIn this study, a lead-free dummy plastic ball grid array component with daisy-chains and Sn4.0 Ag0.5 Cu Pb-free solder balls was assembled on an halogen-free high density interconnection printed circuit board (PCB) by using Sn1.0 Ag0.5 Cu solder paste on the Cu pad surfaces of either organic solderable preservative (OSP) or electroless nickel immersion gold (ENIG). The assembly was tested for the effect of the formation extent of Ag3 Sn intermetallic compound. Afterward a board-level pulse-controlled drop test was conducted on the as-reflowed assemblies according to the JESD22-B110 and JESD22-B111 standards, the impact performance of various surface finished halogen-free printed circuit board assembly was evaluated. The test results showed that most of the fractures occurred around the pad on the test board first. Then cracks propagated across the outer build-up layer. Finally, the inner copper trace was fractured due to the propagated cracks, resulting in the failure of the PCB side. Interfacial stresses numerically obtained by the transient stress responses supported the test observation as the simulated initial crack position was the same as that observed.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleFailure Analysis of Halogen-Free Printed Circuit Board Assembly Under Board-Level Drop Test
    typeJournal Paper
    journal volume134
    journal issue1
    journal titleJournal of Electronic Packaging
    identifier doi10.1115/1.4005956
    journal fristpage11011
    identifier eissn1043-7398
    keywordsSolders
    keywordsDrops
    keywordsFailure
    keywordsPrinted circuit board assemblies
    keywordsSolder joints
    keywordsStress
    keywordsIntermetallic compounds AND Fracture (Process)
    treeJournal of Electronic Packaging:;2012:;volume( 134 ):;issue: 001
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian