Show simple item record

contributor authorHung-Jen Chang
contributor authorChau-Jie Zhan
contributor authorJung-Hua Chou
contributor authorTao-Chih Chang
date accessioned2017-05-09T00:49:34Z
date available2017-05-09T00:49:34Z
date copyrightMarch, 2012
date issued2012
identifier issn1528-9044
identifier otherJEPAE4-26323#011011_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/148614
description abstractIn this study, a lead-free dummy plastic ball grid array component with daisy-chains and Sn4.0 Ag0.5 Cu Pb-free solder balls was assembled on an halogen-free high density interconnection printed circuit board (PCB) by using Sn1.0 Ag0.5 Cu solder paste on the Cu pad surfaces of either organic solderable preservative (OSP) or electroless nickel immersion gold (ENIG). The assembly was tested for the effect of the formation extent of Ag3 Sn intermetallic compound. Afterward a board-level pulse-controlled drop test was conducted on the as-reflowed assemblies according to the JESD22-B110 and JESD22-B111 standards, the impact performance of various surface finished halogen-free printed circuit board assembly was evaluated. The test results showed that most of the fractures occurred around the pad on the test board first. Then cracks propagated across the outer build-up layer. Finally, the inner copper trace was fractured due to the propagated cracks, resulting in the failure of the PCB side. Interfacial stresses numerically obtained by the transient stress responses supported the test observation as the simulated initial crack position was the same as that observed.
publisherThe American Society of Mechanical Engineers (ASME)
titleFailure Analysis of Halogen-Free Printed Circuit Board Assembly Under Board-Level Drop Test
typeJournal Paper
journal volume134
journal issue1
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4005956
journal fristpage11011
identifier eissn1043-7398
keywordsSolders
keywordsDrops
keywordsFailure
keywordsPrinted circuit board assemblies
keywordsSolder joints
keywordsStress
keywordsIntermetallic compounds AND Fracture (Process)
treeJournal of Electronic Packaging:;2012:;volume( 134 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record