Show simple item record

contributor authorC. Montalvo
contributor authorJ. Blázquez
contributor authorM. Balbás
contributor authorA. García-Berrocal
date accessioned2017-05-09T00:49:11Z
date available2017-05-09T00:49:11Z
date copyrightMay, 2012
date issued2012
identifier issn0022-0434
identifier otherJDSMAA-26586#031014_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/148496
description abstractIn nuclear power plants (NPPs), according to current regulations, the response time of capacitive pressure transmitters is used as an index for surveillance. Such measurement can be carried out in situ applying the noise analysis techniques to the sensor output signal. The method is well established, and it is based on the autoregressive (AR) fitting optimized by the Akaike criterion (AIC). The sensor response is influenced by the sensing line, and its length is different in each plant. Recent empirical research has proved that the sensor inner structure can be modeled with a two real poles transfer function. In the present work, it has been proved that the noise analysis applied to the simulated response of a transmitter, modeled with two poles coupled with a sensing line, gives erroneous values for the ramp time delay when the sensing line is long. Specifically, the order of the AR model supplied by the Akaike criterion is not appropriate. Therefore, a Monte Carlo method is proposed to be applied in order to establish a new criterion, based on the statistical analysis of the repeatability of the ramp time delay obtained with the AR model.
publisherThe American Society of Mechanical Engineers (ASME)
titleApplication of the Monte Carlo Method for Capacitive Pressure Transmitters Surveillance in Nuclear Power Plants
typeJournal Paper
journal volume134
journal issue3
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4005509
journal fristpage31014
identifier eissn1528-9028
keywordsPoles (Building)
keywordsPressure sensors
keywordsNoise (Sound)
keywordsDelays
keywordsMonte Carlo methods
keywordsNuclear power stations
keywordsSignals
keywordsSurveillance
keywordsSensors
keywordsSimulation
keywordsIndustrial plants AND Transfer functions
treeJournal of Dynamic Systems, Measurement, and Control:;2012:;volume( 134 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record