Thin-Film PVDF Sensor-Based Monitoring of Cutting Forces in Peripheral End MillingSource: Journal of Dynamic Systems, Measurement, and Control:;2012:;volume( 134 ):;issue: 005::page 51014Author:Lei Ma
,
Shreyes N. Melkote
,
John B. Morehouse
,
James B. Castle
,
James W. Fonda
,
Melissa A. Johnson
DOI: 10.1115/1.4006366Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A sensor module that integrates a thin film polyvinylidene fluoride (PVDF) piezoelectric strain sensor and an in situ data logging platform has been designed and implemented for monitoring of the feed and transverse forces in the peripheral end milling process. The module, which is mounted on the tool shank, measures the dynamic strain(s) produced in the tool and logs the data into an on-board card for later retrieval. The close proximity between the signal source and the PVDF sensor(s) minimizes the attenuation and distortion of the signal along the transmission path and provides high-fidelity signals. It also facilitates the employment of a first principles model based on the Euler–Bernoulli beam theory and constitutive equations of the piezoelectric sensor material to relate the in situ measured PVDF sensor signals to the feed and transverse forces acting on the tool. The PVDF sensor signals are found to compare well with the force signals measured by a platform-type piezoelectric force dynamometer in peripheral end milling experiments.
keyword(s): Force , Sensors , Cutting , Signals AND Milling ,
|
Show full item record
| contributor author | Lei Ma | |
| contributor author | Shreyes N. Melkote | |
| contributor author | John B. Morehouse | |
| contributor author | James B. Castle | |
| contributor author | James W. Fonda | |
| contributor author | Melissa A. Johnson | |
| date accessioned | 2017-05-09T00:49:07Z | |
| date available | 2017-05-09T00:49:07Z | |
| date copyright | September, 2012 | |
| date issued | 2012 | |
| identifier issn | 0022-0434 | |
| identifier other | JDSMAA-926035#051014_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/148458 | |
| description abstract | A sensor module that integrates a thin film polyvinylidene fluoride (PVDF) piezoelectric strain sensor and an in situ data logging platform has been designed and implemented for monitoring of the feed and transverse forces in the peripheral end milling process. The module, which is mounted on the tool shank, measures the dynamic strain(s) produced in the tool and logs the data into an on-board card for later retrieval. The close proximity between the signal source and the PVDF sensor(s) minimizes the attenuation and distortion of the signal along the transmission path and provides high-fidelity signals. It also facilitates the employment of a first principles model based on the Euler–Bernoulli beam theory and constitutive equations of the piezoelectric sensor material to relate the in situ measured PVDF sensor signals to the feed and transverse forces acting on the tool. The PVDF sensor signals are found to compare well with the force signals measured by a platform-type piezoelectric force dynamometer in peripheral end milling experiments. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Thin-Film PVDF Sensor-Based Monitoring of Cutting Forces in Peripheral End Milling | |
| type | Journal Paper | |
| journal volume | 134 | |
| journal issue | 5 | |
| journal title | Journal of Dynamic Systems, Measurement, and Control | |
| identifier doi | 10.1115/1.4006366 | |
| journal fristpage | 51014 | |
| identifier eissn | 1528-9028 | |
| keywords | Force | |
| keywords | Sensors | |
| keywords | Cutting | |
| keywords | Signals AND Milling | |
| tree | Journal of Dynamic Systems, Measurement, and Control:;2012:;volume( 134 ):;issue: 005 | |
| contenttype | Fulltext |