Development and Comparison of Laplace Domain and State-Space Models of a Half-Car With Flexible Body (ESDA2010–24518)Source: Journal of Dynamic Systems, Measurement, and Control:;2012:;volume( 134 ):;issue: 006::page 61013Author:R. Michael Van Auken
DOI: 10.1115/1.4005501Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Math models of wheeled ground vehicle dynamics, including flexible body effects, have been the subject of research and development for many years. These models are typically based on a finite system of simultaneous ordinary differential equations (e.g., state-space models). Higher order models that include flexible body effects offer improved accuracy over a wider frequency range than lower order rigid body models; however, higher order models are typically more sensitive to uncertainties in the model parameters and have increased computational requirements. Lower order models with the desired accuracy may be achieved by model reduction of higher order models. A new more general infinite dimensional Laplace transfer function is derived for beam bending governed by a fourth order wave equation. The resulting infinite dimensional transfer functions for beam bending are then used to develop a transfer function model of a “half-car” with a flexible body. The infinite dimensional transfer function of the half-car model is then used to assess the accuracy of the state-space models. Differences between the models due to model reduction are compared to theoretical upper bounds.
|
Show full item record
| contributor author | R. Michael Van Auken | |
| date accessioned | 2017-05-09T00:49:01Z | |
| date available | 2017-05-09T00:49:01Z | |
| date copyright | November, 2012 | |
| date issued | 2012 | |
| identifier issn | 0022-0434 | |
| identifier other | JDSMAA-926036#061013_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/148439 | |
| description abstract | Math models of wheeled ground vehicle dynamics, including flexible body effects, have been the subject of research and development for many years. These models are typically based on a finite system of simultaneous ordinary differential equations (e.g., state-space models). Higher order models that include flexible body effects offer improved accuracy over a wider frequency range than lower order rigid body models; however, higher order models are typically more sensitive to uncertainties in the model parameters and have increased computational requirements. Lower order models with the desired accuracy may be achieved by model reduction of higher order models. A new more general infinite dimensional Laplace transfer function is derived for beam bending governed by a fourth order wave equation. The resulting infinite dimensional transfer functions for beam bending are then used to develop a transfer function model of a “half-car” with a flexible body. The infinite dimensional transfer function of the half-car model is then used to assess the accuracy of the state-space models. Differences between the models due to model reduction are compared to theoretical upper bounds. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Development and Comparison of Laplace Domain and State-Space Models of a Half-Car With Flexible Body (ESDA2010–24518) | |
| type | Journal Paper | |
| journal volume | 134 | |
| journal issue | 6 | |
| journal title | Journal of Dynamic Systems, Measurement, and Control | |
| identifier doi | 10.1115/1.4005501 | |
| journal fristpage | 61013 | |
| identifier eissn | 1528-9028 | |
| tree | Journal of Dynamic Systems, Measurement, and Control:;2012:;volume( 134 ):;issue: 006 | |
| contenttype | Fulltext |