YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Dynamic Systems, Measurement, and Control
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Dynamic Systems, Measurement, and Control
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Inverse Dynamics of a Redundantly Actuated Four-Bar Mechanism Using an Optimal Control Formulation

    Source: Journal of Dynamic Systems, Measurement, and Control:;2011:;volume( 133 ):;issue: 006::page 61009
    Author:
    Olavo Luppi Silva
    ,
    Luciano Luporini Menegaldo
    DOI: 10.1115/1.4004064
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: This paper presents an approach to estimating joint torques in a four-bar closed-chain mechanism with prescribed kinematics and redundant actuation, i.e., with more actuators than degrees of freedom. This problem has several applications in industrial robots, machine tools, and biomechanics. The inverse dynamics problem is formulated as an optimal control problem (OCP). The dynamical equations are derived for an open-chain mechanism, what keeps the formulation simple and straightforward. Sets of constraints are explored to force the three-link open-chain to behave as a four-bar mechanism with a crank rotating at a constant velocity. The controls calculated from the OCP are assumed to be the input joint torques. The standard case with one torque actuator is solved and compared to cases with two and three actuators. The case of two actuators presented the smallest peak and mean torques, using one specific set of constraints. Such torques were smaller than the solution obtained using an alternative method existing in literature that solves the redundancy problem by means of the pseudo-inverse matrix. Comparison with inverse dynamics solutions using well-established methods for the one-actuator closed-loop four-bar were equal. Reconstructed kinematical trajectories from forward integration of the closed-loop mechanism with the OCP obtained torques were essentially similar. The results suggest that the adopted procedure is promising, giving solutions with lower torque requirements than the regularly actuated case and redundantly actuated computed with other approaches. The applicability of the method has been shown for the four-bar mechanism. Other classes of redundantly actuated, closed-loop mechanisms could be tested using a similar formulation. However, the numerical parameters of the OCP must be chosen carefully to achieve convergence.
    keyword(s): Torque , Actuators , Optimal control , Dynamics (Mechanics) , Mechanisms , Force , Kinematics AND Manipulators ,
    • Download: (1.230Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Inverse Dynamics of a Redundantly Actuated Four-Bar Mechanism Using an Optimal Control Formulation

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/145644
    Collections
    • Journal of Dynamic Systems, Measurement, and Control

    Show full item record

    contributor authorOlavo Luppi Silva
    contributor authorLuciano Luporini Menegaldo
    date accessioned2017-05-09T00:42:54Z
    date available2017-05-09T00:42:54Z
    date copyrightNovember, 2011
    date issued2011
    identifier issn0022-0434
    identifier otherJDSMAA-26565#061009_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/145644
    description abstractThis paper presents an approach to estimating joint torques in a four-bar closed-chain mechanism with prescribed kinematics and redundant actuation, i.e., with more actuators than degrees of freedom. This problem has several applications in industrial robots, machine tools, and biomechanics. The inverse dynamics problem is formulated as an optimal control problem (OCP). The dynamical equations are derived for an open-chain mechanism, what keeps the formulation simple and straightforward. Sets of constraints are explored to force the three-link open-chain to behave as a four-bar mechanism with a crank rotating at a constant velocity. The controls calculated from the OCP are assumed to be the input joint torques. The standard case with one torque actuator is solved and compared to cases with two and three actuators. The case of two actuators presented the smallest peak and mean torques, using one specific set of constraints. Such torques were smaller than the solution obtained using an alternative method existing in literature that solves the redundancy problem by means of the pseudo-inverse matrix. Comparison with inverse dynamics solutions using well-established methods for the one-actuator closed-loop four-bar were equal. Reconstructed kinematical trajectories from forward integration of the closed-loop mechanism with the OCP obtained torques were essentially similar. The results suggest that the adopted procedure is promising, giving solutions with lower torque requirements than the regularly actuated case and redundantly actuated computed with other approaches. The applicability of the method has been shown for the four-bar mechanism. Other classes of redundantly actuated, closed-loop mechanisms could be tested using a similar formulation. However, the numerical parameters of the OCP must be chosen carefully to achieve convergence.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleInverse Dynamics of a Redundantly Actuated Four-Bar Mechanism Using an Optimal Control Formulation
    typeJournal Paper
    journal volume133
    journal issue6
    journal titleJournal of Dynamic Systems, Measurement, and Control
    identifier doi10.1115/1.4004064
    journal fristpage61009
    identifier eissn1528-9028
    keywordsTorque
    keywordsActuators
    keywordsOptimal control
    keywordsDynamics (Mechanics)
    keywordsMechanisms
    keywordsForce
    keywordsKinematics AND Manipulators
    treeJournal of Dynamic Systems, Measurement, and Control:;2011:;volume( 133 ):;issue: 006
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian