YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Plasma Nitrided Type 349 Stainless Steel for Polymer Electrolyte Membrane Fuel Cell Bipolar Plate—Part I: Nitrided in Nitrogen Plasma

    Source: Journal of Fuel Cell Science and Technology:;2010:;volume( 007 ):;issue: 002::page 21018
    Author:
    Heli Wang
    ,
    Glenn Teeter
    ,
    John A. Turner
    DOI: 10.1115/1.3178555
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: An austenite 349 stainless steel was nitrided via nitrogen plasma. Glancing angle X-ray diffraction patterns suggest that the nitrided layer is amorphous. X-ray photoelectron spectroscopy analysis indicated that the plasma nitridation process produced bulk-type nitrides in the surface layer. In general, the nitrided layer was composed of iron oxide in the outer layer and chromium oxide in the inner layers. Contaminations of vanadium and tin were detected in the as-grown nitrided layer; these dissolved away after polarization. The influence of these contaminants on the corrosion resistance of the nitrided layer in polymer electrolyte membrane fuel cell (PEMFC) environments is not considered significant. The nitrided sample had a much higher contact resistance than the bare one and the contact resistance increased with the nitriding time. The high interfacial contact resistance values can be related to the thicker oxide film after plasma nitridation. The corrosion resistances obtained for the 1 h nitrided and bare stainless steels in simulated PEMFC environments were similar. The outmost nitrided layer dissolved after polarization in the PEMFC environments leaving a passive film (modified with nitrides), similar to that of bare stainless steel under the same conditions. The passive film thickness was 3.7 nm for nitrided steel in PEMFC cathode environment and 4.2 nm for nitrided steel in PEMFC anode environment.
    keyword(s): Steel , Polarization (Electricity) , Plasmas (Ionized gases) , Nitrogen , Proton exchange membrane fuel cells , Stainless steel , Contact resistance , Corrosion resistance , Nitriding AND Anodes ,
    • Download: (786.3Kb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Plasma Nitrided Type 349 Stainless Steel for Polymer Electrolyte Membrane Fuel Cell Bipolar Plate—Part I: Nitrided in Nitrogen Plasma

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/143667
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorHeli Wang
    contributor authorGlenn Teeter
    contributor authorJohn A. Turner
    date accessioned2017-05-09T00:38:35Z
    date available2017-05-09T00:38:35Z
    date copyrightApril, 2010
    date issued2010
    identifier issn2381-6872
    identifier otherJFCSAU-28941#021018_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/143667
    description abstractAn austenite 349 stainless steel was nitrided via nitrogen plasma. Glancing angle X-ray diffraction patterns suggest that the nitrided layer is amorphous. X-ray photoelectron spectroscopy analysis indicated that the plasma nitridation process produced bulk-type nitrides in the surface layer. In general, the nitrided layer was composed of iron oxide in the outer layer and chromium oxide in the inner layers. Contaminations of vanadium and tin were detected in the as-grown nitrided layer; these dissolved away after polarization. The influence of these contaminants on the corrosion resistance of the nitrided layer in polymer electrolyte membrane fuel cell (PEMFC) environments is not considered significant. The nitrided sample had a much higher contact resistance than the bare one and the contact resistance increased with the nitriding time. The high interfacial contact resistance values can be related to the thicker oxide film after plasma nitridation. The corrosion resistances obtained for the 1 h nitrided and bare stainless steels in simulated PEMFC environments were similar. The outmost nitrided layer dissolved after polarization in the PEMFC environments leaving a passive film (modified with nitrides), similar to that of bare stainless steel under the same conditions. The passive film thickness was 3.7 nm for nitrided steel in PEMFC cathode environment and 4.2 nm for nitrided steel in PEMFC anode environment.
    publisherThe American Society of Mechanical Engineers (ASME)
    titlePlasma Nitrided Type 349 Stainless Steel for Polymer Electrolyte Membrane Fuel Cell Bipolar Plate—Part I: Nitrided in Nitrogen Plasma
    typeJournal Paper
    journal volume7
    journal issue2
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.3178555
    journal fristpage21018
    identifier eissn2381-6910
    keywordsSteel
    keywordsPolarization (Electricity)
    keywordsPlasmas (Ionized gases)
    keywordsNitrogen
    keywordsProton exchange membrane fuel cells
    keywordsStainless steel
    keywordsContact resistance
    keywordsCorrosion resistance
    keywordsNitriding AND Anodes
    treeJournal of Fuel Cell Science and Technology:;2010:;volume( 007 ):;issue: 002
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian