Show simple item record

contributor authorHeli Wang
contributor authorGlenn Teeter
contributor authorJohn A. Turner
date accessioned2017-05-09T00:38:35Z
date available2017-05-09T00:38:35Z
date copyrightApril, 2010
date issued2010
identifier issn2381-6872
identifier otherJFCSAU-28941#021018_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/143667
description abstractAn austenite 349 stainless steel was nitrided via nitrogen plasma. Glancing angle X-ray diffraction patterns suggest that the nitrided layer is amorphous. X-ray photoelectron spectroscopy analysis indicated that the plasma nitridation process produced bulk-type nitrides in the surface layer. In general, the nitrided layer was composed of iron oxide in the outer layer and chromium oxide in the inner layers. Contaminations of vanadium and tin were detected in the as-grown nitrided layer; these dissolved away after polarization. The influence of these contaminants on the corrosion resistance of the nitrided layer in polymer electrolyte membrane fuel cell (PEMFC) environments is not considered significant. The nitrided sample had a much higher contact resistance than the bare one and the contact resistance increased with the nitriding time. The high interfacial contact resistance values can be related to the thicker oxide film after plasma nitridation. The corrosion resistances obtained for the 1 h nitrided and bare stainless steels in simulated PEMFC environments were similar. The outmost nitrided layer dissolved after polarization in the PEMFC environments leaving a passive film (modified with nitrides), similar to that of bare stainless steel under the same conditions. The passive film thickness was 3.7 nm for nitrided steel in PEMFC cathode environment and 4.2 nm for nitrided steel in PEMFC anode environment.
publisherThe American Society of Mechanical Engineers (ASME)
titlePlasma Nitrided Type 349 Stainless Steel for Polymer Electrolyte Membrane Fuel Cell Bipolar Plate—Part I: Nitrided in Nitrogen Plasma
typeJournal Paper
journal volume7
journal issue2
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.3178555
journal fristpage21018
identifier eissn2381-6910
keywordsSteel
keywordsPolarization (Electricity)
keywordsPlasmas (Ionized gases)
keywordsNitrogen
keywordsProton exchange membrane fuel cells
keywordsStainless steel
keywordsContact resistance
keywordsCorrosion resistance
keywordsNitriding AND Anodes
treeJournal of Fuel Cell Science and Technology:;2010:;volume( 007 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record