| contributor author | Yean-Der Kuan | |
| contributor author | Shi-Min Lee | |
| contributor author | Min-Feng Sung | |
| date accessioned | 2017-05-09T00:33:29Z | |
| date available | 2017-05-09T00:33:29Z | |
| date copyright | February, 2009 | |
| date issued | 2009 | |
| identifier issn | 2381-6872 | |
| identifier other | JFCSAU-28936#011004_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/140885 | |
| description abstract | A series of experiments was conducted to examine the cathode airflow effect on a direct methanol fuel cell (DMFC) via the views of both airflow rate and airflow velocity from a single cell into a three-cell printed circuit board-based DMFC module. The objective of this paper is to discuss the relationship or difference between a single cell and a planar module. All experiments conducted were under constant anode fuel flow rate and operating temperature. The results show that the airflow supplied to a planar DMFC module does not just multiply the number of membrane electrode assemblies (MEAs) to a suitable airflow rate obtained from a single cell DMFC test. The results also show that the cathode airflow velocity effect is more significant than the airflow rate effect. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | The Cathode Airflow Effect on the Direct Methanol Fuel Cell From Single Cell to a Planar Module | |
| type | Journal Paper | |
| journal volume | 6 | |
| journal issue | 1 | |
| journal title | Journal of Fuel Cell Science and Technology | |
| identifier doi | 10.1115/1.2971131 | |
| journal fristpage | 11004 | |
| identifier eissn | 2381-6910 | |
| keywords | Flow (Dynamics) | |
| keywords | Air flow | |
| keywords | Direct methanol fuel cells | |
| keywords | Anodes AND Channels (Hydraulic engineering) | |
| tree | Journal of Fuel Cell Science and Technology:;2009:;volume( 006 ):;issue: 001 | |
| contenttype | Fulltext | |