Show simple item record

contributor authorYean-Der Kuan
contributor authorShi-Min Lee
contributor authorMin-Feng Sung
date accessioned2017-05-09T00:33:29Z
date available2017-05-09T00:33:29Z
date copyrightFebruary, 2009
date issued2009
identifier issn2381-6872
identifier otherJFCSAU-28936#011004_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/140885
description abstractA series of experiments was conducted to examine the cathode airflow effect on a direct methanol fuel cell (DMFC) via the views of both airflow rate and airflow velocity from a single cell into a three-cell printed circuit board-based DMFC module. The objective of this paper is to discuss the relationship or difference between a single cell and a planar module. All experiments conducted were under constant anode fuel flow rate and operating temperature. The results show that the airflow supplied to a planar DMFC module does not just multiply the number of membrane electrode assemblies (MEAs) to a suitable airflow rate obtained from a single cell DMFC test. The results also show that the cathode airflow velocity effect is more significant than the airflow rate effect.
publisherThe American Society of Mechanical Engineers (ASME)
titleThe Cathode Airflow Effect on the Direct Methanol Fuel Cell From Single Cell to a Planar Module
typeJournal Paper
journal volume6
journal issue1
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.2971131
journal fristpage11004
identifier eissn2381-6910
keywordsFlow (Dynamics)
keywordsAir flow
keywordsDirect methanol fuel cells
keywordsAnodes AND Channels (Hydraulic engineering)
treeJournal of Fuel Cell Science and Technology:;2009:;volume( 006 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record