YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Development of Micro- to Macropores in Conductive Polymer-Based Gas Diffusion Layers for Proton Exchange Membrane Fuel Cells

    Source: Journal of Fuel Cell Science and Technology:;2009:;volume( 006 ):;issue: 002::page 21309
    Author:
    Yves Deyrail
    ,
    Serge Kaliaguine
    ,
    Frej Mighri
    DOI: 10.1115/1.3080558
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: The aim of this work is to improve the porosity of gas diffusion layers (GDLs) for proton exchange membrane fuel cell electrodes. These GDLs are made by twin-screw extrusion process from conductive formulations composed of polyamide11 (PA11)/polystyrene (PS) as the polymer matrix phase and an appropriate mixture of carbon black (CB) and graphite (GR) as the conductive additives. Final GDL porosity, especially macroporosity, was generated by selective extraction of the PS phase using adequate solvents. Since the generation of pores was found to be directly related to blend morphology, several blend compositions were studied and small amounts (2–6 wt %) of montmorillonite (MMT) clay were used as compatibilizer to improve the dispersion of the PS phase inside the PA11. It was observed that, although GDL volume porosity was not or slightly affected by the addition of MMT compatibilizer, its pore specific surface area was clearly increased. For GDLs made from a blend composed of 65 wt % of PA11/PS (30/70) and 35 wt % of GB/GR (57/43), an increase from 53 m2/g (with no MMT) to around 75 m2/g (with 2 wt % MMT) was obtained. This improvement within the addition of MMT was attributed to the modification of the dispersion state of PS phase. Such modification led to a higher connectivity of pores and consequently more accessibility to the micro/mesopores of CB and GR. The major changes observed with the incorporation of MMT compatibilizer were obtained for the small pore sizes (in the range of 10–400 nm). Depending on MMT content, a considerable shift of pore size distribution in this range to smaller or higher values was obtained. Then the MMT compatibilization could be considered as an interesting route to tailor GDL porous properties.
    keyword(s): Porosity , Gas diffusion layers , Polymers , Extruding AND Proton exchange membrane fuel cells ,
    • Download: (973.8Kb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Development of Micro- to Macropores in Conductive Polymer-Based Gas Diffusion Layers for Proton Exchange Membrane Fuel Cells

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/140875
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorYves Deyrail
    contributor authorSerge Kaliaguine
    contributor authorFrej Mighri
    date accessioned2017-05-09T00:33:28Z
    date available2017-05-09T00:33:28Z
    date copyrightMay, 2009
    date issued2009
    identifier issn2381-6872
    identifier otherJFCSAU-28937#021309_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/140875
    description abstractThe aim of this work is to improve the porosity of gas diffusion layers (GDLs) for proton exchange membrane fuel cell electrodes. These GDLs are made by twin-screw extrusion process from conductive formulations composed of polyamide11 (PA11)/polystyrene (PS) as the polymer matrix phase and an appropriate mixture of carbon black (CB) and graphite (GR) as the conductive additives. Final GDL porosity, especially macroporosity, was generated by selective extraction of the PS phase using adequate solvents. Since the generation of pores was found to be directly related to blend morphology, several blend compositions were studied and small amounts (2–6 wt %) of montmorillonite (MMT) clay were used as compatibilizer to improve the dispersion of the PS phase inside the PA11. It was observed that, although GDL volume porosity was not or slightly affected by the addition of MMT compatibilizer, its pore specific surface area was clearly increased. For GDLs made from a blend composed of 65 wt % of PA11/PS (30/70) and 35 wt % of GB/GR (57/43), an increase from 53 m2/g (with no MMT) to around 75 m2/g (with 2 wt % MMT) was obtained. This improvement within the addition of MMT was attributed to the modification of the dispersion state of PS phase. Such modification led to a higher connectivity of pores and consequently more accessibility to the micro/mesopores of CB and GR. The major changes observed with the incorporation of MMT compatibilizer were obtained for the small pore sizes (in the range of 10–400 nm). Depending on MMT content, a considerable shift of pore size distribution in this range to smaller or higher values was obtained. Then the MMT compatibilization could be considered as an interesting route to tailor GDL porous properties.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleDevelopment of Micro- to Macropores in Conductive Polymer-Based Gas Diffusion Layers for Proton Exchange Membrane Fuel Cells
    typeJournal Paper
    journal volume6
    journal issue2
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.3080558
    journal fristpage21309
    identifier eissn2381-6910
    keywordsPorosity
    keywordsGas diffusion layers
    keywordsPolymers
    keywordsExtruding AND Proton exchange membrane fuel cells
    treeJournal of Fuel Cell Science and Technology:;2009:;volume( 006 ):;issue: 002
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian