YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Dynamic Systems, Measurement, and Control
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Dynamic Systems, Measurement, and Control
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Optimal Control of Tandem Cold Rolling Using A Pointwise Linear Quadratic Technique With Trims

    Source: Journal of Dynamic Systems, Measurement, and Control:;2008:;volume( 130 ):;issue: 002::page 21006
    Author:
    John Pittner
    ,
    Marwan A. Simaan
    DOI: 10.1115/1.2837312
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: The tandem cold rolling of metal strip is a complex multivariable process whose control presents a significant engineering challenge because of the complex interaction between the process variables, the nonlinearities (which change with operating conditions), and the interstand time delays (which change significantly with the mill speed). The present technology generally relies on a control structure that has been successful in producing an acceptable output, but has limited capability for improvement in performance. This paper describes a new strategy for control of the mill that overcomes many limitations of the present controllers. The new strategy is based on a pointwise linear quadratic technique wherein a state-dependent algebraic Riccati equation is solved pointwise to establish a control law for a multiinput–multioutput controller, with appropriate trimming functions. For this application, the features of this novel strategy compare favorably to those of other techniques for control of nonlinear systems in the areas of simplicity of implementation, provision for the use of physical intuition in the design process, and strong robustness to disturbances and uncertainties. During simulations using the new controller coupled to a nonlinear model of the process, the tolerance in mill exit thickness was ∼0.2% for several rolling schedules using mild steel during operations at steady speed and during speed changes, and in the presence of typical disturbances with uncertainties in modeling and measurement. This offers the potential for improvement over present industrial controllers, which typically hold the tolerance in mill exit thickness to within 0.5–0.8%. In addition, excursions in the individual mill stand output thicknesses and interstand tensions are reduced, which contributes to the stability of the rolling process.
    keyword(s): Functions , Strips , Tension , Thickness , Control equipment , Modeling , Delays AND Optimal control ,
    • Download: (703.1Kb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Optimal Control of Tandem Cold Rolling Using A Pointwise Linear Quadratic Technique With Trims

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/137705
    Collections
    • Journal of Dynamic Systems, Measurement, and Control

    Show full item record

    contributor authorJohn Pittner
    contributor authorMarwan A. Simaan
    date accessioned2017-05-09T00:27:29Z
    date available2017-05-09T00:27:29Z
    date copyrightMarch, 2008
    date issued2008
    identifier issn0022-0434
    identifier otherJDSMAA-26437#021006_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/137705
    description abstractThe tandem cold rolling of metal strip is a complex multivariable process whose control presents a significant engineering challenge because of the complex interaction between the process variables, the nonlinearities (which change with operating conditions), and the interstand time delays (which change significantly with the mill speed). The present technology generally relies on a control structure that has been successful in producing an acceptable output, but has limited capability for improvement in performance. This paper describes a new strategy for control of the mill that overcomes many limitations of the present controllers. The new strategy is based on a pointwise linear quadratic technique wherein a state-dependent algebraic Riccati equation is solved pointwise to establish a control law for a multiinput–multioutput controller, with appropriate trimming functions. For this application, the features of this novel strategy compare favorably to those of other techniques for control of nonlinear systems in the areas of simplicity of implementation, provision for the use of physical intuition in the design process, and strong robustness to disturbances and uncertainties. During simulations using the new controller coupled to a nonlinear model of the process, the tolerance in mill exit thickness was ∼0.2% for several rolling schedules using mild steel during operations at steady speed and during speed changes, and in the presence of typical disturbances with uncertainties in modeling and measurement. This offers the potential for improvement over present industrial controllers, which typically hold the tolerance in mill exit thickness to within 0.5–0.8%. In addition, excursions in the individual mill stand output thicknesses and interstand tensions are reduced, which contributes to the stability of the rolling process.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleOptimal Control of Tandem Cold Rolling Using A Pointwise Linear Quadratic Technique With Trims
    typeJournal Paper
    journal volume130
    journal issue2
    journal titleJournal of Dynamic Systems, Measurement, and Control
    identifier doi10.1115/1.2837312
    journal fristpage21006
    identifier eissn1528-9028
    keywordsFunctions
    keywordsStrips
    keywordsTension
    keywordsThickness
    keywordsControl equipment
    keywordsModeling
    keywordsDelays AND Optimal control
    treeJournal of Dynamic Systems, Measurement, and Control:;2008:;volume( 130 ):;issue: 002
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian