Geometric Design Using Hypotrochoid and Nonundercutting Conditions for an Internal Cycloidal GearSource: Journal of Mechanical Design:;2007:;volume( 129 ):;issue: 004::page 413DOI: 10.1115/1.2437806Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper uses the theory of gearing to derive the mathematical model of an internal cycloidal gear with tooth difference. Whereas the outer rotor profile is based on a curve equidistant to a hypotrochoidal (or extended hypocycloid) curve, the inner rotor design generally depends upon type of use—e.g., when used as a speed reducer, it is a pin wheel. Therefore, this analysis proposes designs for both a gerotor and a speed reducer. Specifically, for an inner rotor used as a gerotor pump, it outlines a mathematical model to improve pump efficiency and derives a dimensionless equation of nonundercutting. For the speed reducer, it develops and demonstrates with numerical examples, a feasible design region without undercutting on the tooth profile or interference between the adjacent pins.
keyword(s): Design , Rotors , Equations AND Gears ,
|
Collections
Show full item record
| contributor author | Yii-Wen Hwang | |
| contributor author | Chiu-Fan Hsieh | |
| date accessioned | 2017-05-09T00:25:07Z | |
| date available | 2017-05-09T00:25:07Z | |
| date copyright | April, 2007 | |
| date issued | 2007 | |
| identifier issn | 1050-0472 | |
| identifier other | JMDEDB-27846#413_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/136493 | |
| description abstract | This paper uses the theory of gearing to derive the mathematical model of an internal cycloidal gear with tooth difference. Whereas the outer rotor profile is based on a curve equidistant to a hypotrochoidal (or extended hypocycloid) curve, the inner rotor design generally depends upon type of use—e.g., when used as a speed reducer, it is a pin wheel. Therefore, this analysis proposes designs for both a gerotor and a speed reducer. Specifically, for an inner rotor used as a gerotor pump, it outlines a mathematical model to improve pump efficiency and derives a dimensionless equation of nonundercutting. For the speed reducer, it develops and demonstrates with numerical examples, a feasible design region without undercutting on the tooth profile or interference between the adjacent pins. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Geometric Design Using Hypotrochoid and Nonundercutting Conditions for an Internal Cycloidal Gear | |
| type | Journal Paper | |
| journal volume | 129 | |
| journal issue | 4 | |
| journal title | Journal of Mechanical Design | |
| identifier doi | 10.1115/1.2437806 | |
| journal fristpage | 413 | |
| journal lastpage | 420 | |
| identifier eissn | 1528-9001 | |
| keywords | Design | |
| keywords | Rotors | |
| keywords | Equations AND Gears | |
| tree | Journal of Mechanical Design:;2007:;volume( 129 ):;issue: 004 | |
| contenttype | Fulltext |