Show simple item record

contributor authorYii-Wen Hwang
contributor authorChiu-Fan Hsieh
date accessioned2017-05-09T00:25:07Z
date available2017-05-09T00:25:07Z
date copyrightApril, 2007
date issued2007
identifier issn1050-0472
identifier otherJMDEDB-27846#413_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136493
description abstractThis paper uses the theory of gearing to derive the mathematical model of an internal cycloidal gear with tooth difference. Whereas the outer rotor profile is based on a curve equidistant to a hypotrochoidal (or extended hypocycloid) curve, the inner rotor design generally depends upon type of use—e.g., when used as a speed reducer, it is a pin wheel. Therefore, this analysis proposes designs for both a gerotor and a speed reducer. Specifically, for an inner rotor used as a gerotor pump, it outlines a mathematical model to improve pump efficiency and derives a dimensionless equation of nonundercutting. For the speed reducer, it develops and demonstrates with numerical examples, a feasible design region without undercutting on the tooth profile or interference between the adjacent pins.
publisherThe American Society of Mechanical Engineers (ASME)
titleGeometric Design Using Hypotrochoid and Nonundercutting Conditions for an Internal Cycloidal Gear
typeJournal Paper
journal volume129
journal issue4
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2437806
journal fristpage413
journal lastpage420
identifier eissn1528-9001
keywordsDesign
keywordsRotors
keywordsEquations AND Gears
treeJournal of Mechanical Design:;2007:;volume( 129 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record