YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Novel Deposition of Pt∕C Nanocatalysts and Nafion® Solution on Carbon-Based Electrodes via Electrophoretic Process for PEM Fuel Cells

    Source: Journal of Fuel Cell Science and Technology:;2007:;volume( 004 ):;issue: 001::page 72
    Author:
    R. F. Louh
    ,
    Hansen Huang
    ,
    Felix Tsai
    DOI: 10.1115/1.2393307
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Nanosized platinum particles supported on carbon black carriers (Pt∕C) are popular for use in fabrication of proton exchange membrane fuel cells (PEMFCs). Here, an electrophoretic deposition (EPD) process is proposed to investigate the power performance of Pt∕C nanopowders onto various carbon-based electrodes for the PEMFC applications in a better controlled and cost-effective manner. Novel deposition of Pt∕C nanocatalysts and Nafion® solution via electrophoretic process give rise to higher deposition efficiency and a uniform distribution of catalyst and Nafion ionomer on the electrodes of PEMFCs. Preparation of an EPD suspension with good dispersivity is much desirable for an agreeable overall performance of catalyst coating in terms of types of organic solvents, milling processes, and use of pH adjusting agents and surfactants in the EPD suspension. The EPD suspension was prepared by sonication of mixture of Pt∕C nanopowders, Nafion solution and isopropyl alcohol, the optimal pH value of which was reached by using acetic acid or ammonium hydroxide. The colloidal stability of EPD suspension was achieved at pH ∼10 for an EPD suspension of either Pt∕C catalysts or mixture of Pt∕C catalysts and Nafion ionomer. A nicely distributed deposition of Pt∕C nanocatalysts and Nafion ionomer on both hydrophilic or hydrophobic carbon-based electrodes was successfully obtained by using Pt∕C concentration of 1.0g∕l, electrical field of 300V∕cm, and deposition time of 5min. Microstructural analysis results indicate that Pt∕C nanopowders not only embrace the entire surface of carbon fibers but also infiltrate into the gaps and voids in fiber bundles such that a higher contact area of the same loading of Pt∕C nanocatalysts through the EPD process is thus expected. At present, the EPD process can effectively save more of Pt catalyst loading on electrodes in PEMFC, as compared to conventional methods, such as screen printing, brushing, or spraying through the similar level of power performance for PEMFCs.
    keyword(s): Electrophoretic deposition , Carbon , Electrodes , Catalysts , Proton exchange membrane fuel cells , Electric fields , Printing , Particulate matter AND Coatings ,
    • Download: (1.102Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Novel Deposition of Pt∕C Nanocatalysts and Nafion® Solution on Carbon-Based Electrodes via Electrophoretic Process for PEM Fuel Cells

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/136146
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorR. F. Louh
    contributor authorHansen Huang
    contributor authorFelix Tsai
    date accessioned2017-05-09T00:24:27Z
    date available2017-05-09T00:24:27Z
    date copyrightFebruary, 2007
    date issued2007
    identifier issn2381-6872
    identifier otherJFCSAU-28928#72_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136146
    description abstractNanosized platinum particles supported on carbon black carriers (Pt∕C) are popular for use in fabrication of proton exchange membrane fuel cells (PEMFCs). Here, an electrophoretic deposition (EPD) process is proposed to investigate the power performance of Pt∕C nanopowders onto various carbon-based electrodes for the PEMFC applications in a better controlled and cost-effective manner. Novel deposition of Pt∕C nanocatalysts and Nafion® solution via electrophoretic process give rise to higher deposition efficiency and a uniform distribution of catalyst and Nafion ionomer on the electrodes of PEMFCs. Preparation of an EPD suspension with good dispersivity is much desirable for an agreeable overall performance of catalyst coating in terms of types of organic solvents, milling processes, and use of pH adjusting agents and surfactants in the EPD suspension. The EPD suspension was prepared by sonication of mixture of Pt∕C nanopowders, Nafion solution and isopropyl alcohol, the optimal pH value of which was reached by using acetic acid or ammonium hydroxide. The colloidal stability of EPD suspension was achieved at pH ∼10 for an EPD suspension of either Pt∕C catalysts or mixture of Pt∕C catalysts and Nafion ionomer. A nicely distributed deposition of Pt∕C nanocatalysts and Nafion ionomer on both hydrophilic or hydrophobic carbon-based electrodes was successfully obtained by using Pt∕C concentration of 1.0g∕l, electrical field of 300V∕cm, and deposition time of 5min. Microstructural analysis results indicate that Pt∕C nanopowders not only embrace the entire surface of carbon fibers but also infiltrate into the gaps and voids in fiber bundles such that a higher contact area of the same loading of Pt∕C nanocatalysts through the EPD process is thus expected. At present, the EPD process can effectively save more of Pt catalyst loading on electrodes in PEMFC, as compared to conventional methods, such as screen printing, brushing, or spraying through the similar level of power performance for PEMFCs.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleNovel Deposition of Pt∕C Nanocatalysts and Nafion® Solution on Carbon-Based Electrodes via Electrophoretic Process for PEM Fuel Cells
    typeJournal Paper
    journal volume4
    journal issue1
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.2393307
    journal fristpage72
    journal lastpage78
    identifier eissn2381-6910
    keywordsElectrophoretic deposition
    keywordsCarbon
    keywordsElectrodes
    keywordsCatalysts
    keywordsProton exchange membrane fuel cells
    keywordsElectric fields
    keywordsPrinting
    keywordsParticulate matter AND Coatings
    treeJournal of Fuel Cell Science and Technology:;2007:;volume( 004 ):;issue: 001
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian