Show simple item record

contributor authorR. F. Louh
contributor authorHansen Huang
contributor authorFelix Tsai
date accessioned2017-05-09T00:24:27Z
date available2017-05-09T00:24:27Z
date copyrightFebruary, 2007
date issued2007
identifier issn2381-6872
identifier otherJFCSAU-28928#72_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136146
description abstractNanosized platinum particles supported on carbon black carriers (Pt∕C) are popular for use in fabrication of proton exchange membrane fuel cells (PEMFCs). Here, an electrophoretic deposition (EPD) process is proposed to investigate the power performance of Pt∕C nanopowders onto various carbon-based electrodes for the PEMFC applications in a better controlled and cost-effective manner. Novel deposition of Pt∕C nanocatalysts and Nafion® solution via electrophoretic process give rise to higher deposition efficiency and a uniform distribution of catalyst and Nafion ionomer on the electrodes of PEMFCs. Preparation of an EPD suspension with good dispersivity is much desirable for an agreeable overall performance of catalyst coating in terms of types of organic solvents, milling processes, and use of pH adjusting agents and surfactants in the EPD suspension. The EPD suspension was prepared by sonication of mixture of Pt∕C nanopowders, Nafion solution and isopropyl alcohol, the optimal pH value of which was reached by using acetic acid or ammonium hydroxide. The colloidal stability of EPD suspension was achieved at pH ∼10 for an EPD suspension of either Pt∕C catalysts or mixture of Pt∕C catalysts and Nafion ionomer. A nicely distributed deposition of Pt∕C nanocatalysts and Nafion ionomer on both hydrophilic or hydrophobic carbon-based electrodes was successfully obtained by using Pt∕C concentration of 1.0g∕l, electrical field of 300V∕cm, and deposition time of 5min. Microstructural analysis results indicate that Pt∕C nanopowders not only embrace the entire surface of carbon fibers but also infiltrate into the gaps and voids in fiber bundles such that a higher contact area of the same loading of Pt∕C nanocatalysts through the EPD process is thus expected. At present, the EPD process can effectively save more of Pt catalyst loading on electrodes in PEMFC, as compared to conventional methods, such as screen printing, brushing, or spraying through the similar level of power performance for PEMFCs.
publisherThe American Society of Mechanical Engineers (ASME)
titleNovel Deposition of Pt∕C Nanocatalysts and Nafion® Solution on Carbon-Based Electrodes via Electrophoretic Process for PEM Fuel Cells
typeJournal Paper
journal volume4
journal issue1
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.2393307
journal fristpage72
journal lastpage78
identifier eissn2381-6910
keywordsElectrophoretic deposition
keywordsCarbon
keywordsElectrodes
keywordsCatalysts
keywordsProton exchange membrane fuel cells
keywordsElectric fields
keywordsPrinting
keywordsParticulate matter AND Coatings
treeJournal of Fuel Cell Science and Technology:;2007:;volume( 004 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record