Search
Now showing items 1-8 of 8
A Surface Crack in Shells Under Mixed-Mode Loading Conditions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The problem of a shallow shell containing a surface crack and subjected to general loading conditions is considered. It is shown that, as in the three-dimensional elasticity formulation, the ...
Mechanical Modeling of Multilayered Films on an Elastic Substrate—Part II: Results and Discussion
Publisher: The American Society of Mechanical Engineers (ASME)
Mechanical Modeling of Multilayered Films on an Elastic Substrate—Part I: Analysis
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper the basic residual stress problem for multilayered or multiple films on an elastic substrate is considered. The stresses may be caused by a homogeneous temperature variation or ...
Bending of a Thin Reissner Plate With a Through Crack
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The title problem was first considered by Knowles and Wang (1960) and was shown to be related to the solution given by the classical plate theory. This solution is actually the outer solution ...
A Note on the Mixed-Mode Line Spring Model for Shells
Publisher: The American Society of Mechanical Engineers (ASME)
A Parametric Study of Passive Flow Control for a Short, High Area Ratio 90deg Curved Diffuser
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper represents the results of an experimental program with the aim of controlling the flow in a highly unstable 90deg curved diffuser. The diffuser, which is an integral part of an ...
The Crack Problem in Bonded Nonhomogeneous Materials
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper the plane elasticity problem for two bonded half-planes containing a crack perpendicular to the interface is considered. The primary objective of the paper is to study the effect ...
The Mode III Crack Problem in Bonded Materials With a Nonhomogeneous Interfacial Zone
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper the mode III crack problem for two bonded homogeneous half planes is considered. The interfacial zone is modeled by a nonhomogeneous strip in such a way that the shear modulus ...
CSV
RIS