Show simple item record

dc.contributor.authorJ. R. Fowler
dc.contributor.authorT. N. Gardner
dc.date.accessioned2017-05-08T23:08:24Z
dc.date.available2017-05-08T23:08:24Z
dc.date.copyrightDecember, 1980
dc.date.issued1980
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26380#242_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93132
dc.description.abstractIn drilling from floating vessels, most operators and drilling contractors specify an allowable lower ball joint angle of 3–5 deg for drilling and 1–3 deg for running casing. Presently, no one uses tension in the drill pipe or casing as a factor in setting allowable ball joint angles. The results of the analysis detailed in this paper show that the allowable ball joint angles in use are justified for well depths less than 5000 ft below the ball joint. However, the allowable angle is too high for continual operation for well depths below the ball joint of 10,000 ft or more. The increased drill pipe or casing tension in deeper wells causes high alternating stresses in the drill pipe and high wear rates where the pipe bears against equipment in the ball joint region. The principal conclusion of this paper is that the allowable lower ball joint angle should not be constant, but should vary with the tension in the drill pipe as the well is being drilled.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCriterion for Allowable Lower Ball Joint Angle in Floating Drilling
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3227884
dc.journal.fristpage242
dc.journal.lastpage250
dc.identifier.eissn1528-8994
dc.keywordsDrilling
dc.keywordsPipes
dc.keywordsDrills (Tools)
dc.keywordsTension
dc.keywordsVessels
dc.keywordsStress
dc.keywordsWear AND Wells
dc.treeJournal of Energy Resources Technology:;1980:;volume( 102 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record