• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Engineering Materials and Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Engineering Materials and Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Warm and Cold Heading of Stainless Steel

    Thumbnail
    View/Open
    JEMTA8-26840#136_1.pdf (2.292Mb)
    Date
    1975
    Author
    J. L. Tevaarwerk
    R. Sowerby
    A. Plumtree
    Metadata
    Show full item record
    Abstract
    A series of warm and cold heading tests ranging from room temperature to 400 deg C have been conducted on 305 and copper bearing 302 stainless steel wires as well as 0.2 percent C steel wire using a fully instrumented double blow Waterbury-Farrel machine heading 100 blanks per minute. Total and frictional forces developed during the first blow using a variety of lubricants, together with the second blow loads have been recorded. The effectiveness of the different lubricants employed was examined. The optimum blank temperature for warm heading stainless steel is in the range 200 to 400 deg C where the punch loads are reduced about 25/30 percent, compared to cold heading. Within this temperature range the friction coefficient for the copper coated stainless steel possessing a stearate film on the surface remains relatively low (μ ∼ 0.01/0.02). Reduced punch loads are shown to effect an increase in punch life. For all temperatures the heading loads for the copper bearing 302 stainless steel were lower than for 305 stainless steel. Both these materials exhibit a weak dynamic strain aging effect compared with plain carbon steel. In fact the heading loads were higher between 300 deg and 400 deg C for the plain carbon steel. At room temperature components made from both copper bearing 302 stainless steel and 305 stainless steel possessed fewer shear cracks when employing the former material and this effect is attributed to a lower strain hardening rate.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/87532
    Collections
    • Journal of Engineering Materials and Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV